The catch
Anycubic Kobra S1 Combo
Color changes create waste with only a single nozzle.
Side by side
Anycubic Kobra S1 Combo vs Bambu Lab P1S Combo compared: P1S gives the part slightly more room, S1 includes drying
Quick verdict
The included filament drying system makes the Kobra S1 Combo the one to buy. The slightly larger build cube is the reason to pick the P1S Combo.
Before you buy
Why, and what it costs you
Where these two really part ways
Anycubic Kobra S1 Combo is the better match for “Have fumes better contained” and “Dry filament as you print”. Bambu Lab P1S Combo is the better match for “Begin your first project” and “Skip leveling the bed by hand”.
Where this comes from
This lines up the current strong and useful fit ratings for the exact products. It does not roll them into one overall score.
The catch
Bambu Lab P1S Combo
Color changes purge filament since the nozzle is shared.
Anycubic Kobra S1 Combo
- Why pick it
- Dry filament as you print
- Contain fumes better
- The catch
- Color changes create waste with only a single nozzle.
Bambu Lab P1S Combo
- Why pick it
- Skip hand leveling of the bed
- Begin with a first project
- The catch
- Color changes purge filament since the nozzle is shared.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
Anycubic Kobra S1 Combo and Bambu Lab P1S Combo weighed against each other on build volume, materials, enclosure and workflow.
This one comes down to build volume and workflow first, then to the limits of your own setup.
Which one fits
Pick the situations that sound like you
Dry filament as you print
Moisture-sensitive filament stays conditioned during printing when the feed system dries it.
- Anycubic Kobra S1 Combo
- Better fit
- Bambu Lab P1S Combo
- Depends
Skip leveling the bed by hand
You no longer repeat a manual setup step when the bed calibrates itself.
- Anycubic Kobra S1 Combo
- Depends
- Bambu Lab P1S Combo
- Better fit
Have fumes better contained
Odor and airborne material from a print can be kept in check by an enclosure with filtration.
- Anycubic Kobra S1 Combo
- Better fit
- Bambu Lab P1S Combo
- Depends
Begin your first project
Automatic calibration takes several manual steps off your list before the first print.
- Anycubic Kobra S1 Combo
- Depends
- Bambu Lab P1S Combo
- Better fit
Run flexible TPU
Flexible TPU gets a short, controlled filament path from a direct-drive toolhead.
- Anycubic Kobra S1 Combo
- Depends
- Bambu Lab P1S Combo
- Better fit
Turn out functional parts quickly
Both models list “The printer has an enclosed build area. Its recorded material path covers PLA and ABS” for materials and enclosure. Both models show the same result for “Materials and enclosure”, so this row won't decide between them.
- Anycubic Kobra S1 Combo
- Similar
- Bambu Lab P1S Combo
- Similar
In practice
Differences you will notice
Where these two really part ways
Anycubic Kobra S1 Combo is the better match for “Have fumes better contained” and “Dry filament as you print”. Bambu Lab P1S Combo is the better match for “Begin your first project” and “Skip leveling the bed by hand”.
How we worked this out
This lines up the current strong and useful fit ratings for the exact products. It does not roll them into one overall score.
These needs do not split the pair
Both meet the same 2 of the 2 needs this comparison is built around, so the choice comes down to “build volume” and “workflow”.
How we worked this out
Both products are checked against the same needs. The first verified differences still standing are named here.
Models that handle “Run four-color jobs” and “Turn out functional parts quickly”
8 of the 23 3d printers checked handle both “Run four-color jobs” and “Turn out functional parts quickly”. Both make the cut.
How we worked this out
You can reproduce the count by filtering the current category for models with a strong or useful fit on both needs.
Option A
Anycubic, Kobra S1 Combo
Anycubic Kobra S1 Combo
An enclosed print area holds a 250 × 250 × 250 mm build volume.
- Best for
- four-color prints and speedy functional parts
Facts we checked
- The printer provides 250 × 250 × 250 mm build volume.
- You get an enclosed print area.
- PLA and ABS fall within the compared materials.
- Before your first print, read the setup and calibration instructions for the exact model.
Option B
Bambu Lab, P1S Combo
Bambu Lab P1S Combo
Build volume is 256 × 256 × 256 mm, and the print area is enclosed.
- Best for
- four-color prints and fast functional parts
Facts we checked
- It offers 256 × 256 × 256 mm of build volume.
- You get an enclosed print area.
- PLA and ABS fall within the compared materials.
- Its documented automatic setup features cover preparing for the first print.
Spec by spec
Where they really differ
| Spec | Anycubic Kobra S1 Combo | Bambu Lab P1S Combo | In practice |
|---|---|---|---|
| Build volume | The listed build area is 250 × 250 × 250 mm. | The listed build area is 256 × 256 × 256 mm. | Consider this a firm ceiling on the size or amount that fits in a single run. Shape can count as much as the headline number does. |
| Materials and enclosure | The printer has an enclosed build area. Its recorded material path covers PLA and ABS. | The printer has an enclosed build area. Its recorded material path covers PLA and ABS. | Both models show the same result for “Materials and enclosure”, so this row won't decide between them. |
| Workflow | Check the model-specific setup and calibration instructions. Automated multicolor is supported. | Automatic setup features are documented. Automated multicolor is supported. | How many steps fall to you and how much happens automatically both come down to this. |
Trade-offs
What each pick costs you
With Anycubic Kobra S1 Combo
- Nothing actively heats the chamber.
With Bambu Lab P1S Combo
- Although the chamber is enclosed, nothing actively heats it.
Decision guide
How to decide
Go with the Kobra S1 Combo for its built-in filament drying system, or with the P1S Combo for its slightly larger build cube.
What sets them apart
Enclosed CoreXY design, four colors and a camera are common to both.
The numbers in practice
The Kobra S1 has a 250 mm cubed volume.
The downside
For the P1S it is 256 mm cubed.
What this page can’t tell you
- A part that fits the build volume can still fail if the shape is unsupported.
- Material brands may need their own temperatures.
- Listed speeds say little about how print quality compares.
By the numbers
What the data shows
What we found across the 3D printers we compare, plus the checked facts behind each finding.
How many fit
8 of the 23 models checked meet every need here: “Run four-color jobs” and “Turn out functional parts quickly”.
8 models fit, out of 23 checkedShow the facts and the math
How we countedThe count uses each product's current fit ratings for “Run four-color jobs” and “Turn out functional parts quickly”. A need with no documented match is not counted.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Anycubic Kobra S1 Combo |
|
| |
| Bambu Lab P1S Combo |
|
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
Anycubic Kobra S1 Combo
Dry filament as you print
See price & reviews on AmazonBambu Lab P1S Combo
Skip hand leveling of the bed
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money