The catch
Flashforge AD5X
The package selected is an open one.
Side by side
Flashforge AD5X vs Adventurer 5M Pro compared: Same 220 mm cube, so pick included colors or an enclosure for ABS and ASA
Quick verdict
Take the AD5X if you want compatible four-color prints from its included IFS. Take the Adventurer 5M Pro if you want the enclosure it comes with and the ABS or ASA workflows Flashforge lists. With a 220 mm cube on both, materials and feeding hardware settle it, not a larger printing area.
Before you buy
Why, and what it costs you
A larger machine is not needed for colored labels
In the same 220 mm cube as 5M Pro, AD5X handles compatible four-color changes automatically.
Where this comes from
The build envelopes are equal, and IFS is included with AD5X.
The catch
Flashforge Adventurer 5M Pro
There is no automatic four-color feeding.
Flashforge AD5X
- Why pick it
- Run four colors through the supplied IFS
- Print with the AD5X 300 C hotend
- The catch
- The package selected is an open one.
Flashforge Adventurer 5M Pro
- Why pick it
- Begin with a factory-built enclosure
- Work from the Flashforge ABS and ASA profiles
- The catch
- There is no automatic four-color feeding.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
AD5X and Adventurer 5M Pro: how they differ for enclosed ABS work and multicolor PLA projects, with an identical build volume.
Take the AD5X if you want compatible four-color prints from its included IFS. Take the Adventurer 5M Pro if you want the enclosure it comes with and the ABS or ASA workflows Flashforge lists. With a 220 mm cube on both, materials and feeding hardware settle it, not a larger printing area.
Which one fits
Pick the situations that sound like you
Print signs in four compatible colors
Only AD5X comes with IFS.
- Flashforge AD5X
- Better fit
- Flashforge Adventurer 5M Pro
- Caution
Use a factory enclosure to print ABS
The relevant enclosure is part of the 5M Pro.
- Flashforge AD5X
- Caution
- Flashforge Adventurer 5M Pro
- Better fit
Lay a 230 mm square panel flat to print
Neither nominal bed goes past 220 mm.
- Flashforge AD5X
- Not suitable
- Flashforge Adventurer 5M Pro
- Not suitable
Run a compatible filament profile that needs a 290 C nozzle
5M Pro publishes 280 C, and AD5X reaches 300 C.
- Flashforge AD5X
- Better fit
- Flashforge Adventurer 5M Pro
- Not suitable
In practice
Differences you will notice
A larger machine is not needed for colored labels
In the same 220 mm cube as 5M Pro, AD5X handles compatible four-color changes automatically.
How we worked this out
The build envelopes are equal, and IFS is included with AD5X.
ABS changes what the enclosure has to do
An enclosure comes with 5M Pro, and its material table lists ABS and ASA.
How we worked this out
AD5X's nozzle ceiling is higher, but its standard configuration is open. ABS and ASA are listed by Flashforge for 5M Pro.
Without a redesign, oversized parts rule out both
Both nominal beds are too small for a 230 mm square part laid flat.
How we worked this out
In the example, a flat 230 x 230 mm footprint is set against two 220 x 220 mm beds.
Option A
Flashforge, AD5X
Flashforge AD5X
The printer has an open-frame layout and a 220 × 220 × 220 mm build volume.
- Best for
- Run four colors through the supplied IFS
Facts we checked
- Build space: 220 x 220 x 220 mm
- Automatic color system: A four-color IFS comes with it
- Enclosure: The selected package has an open frame
- Hottest nozzle setting: 300 C
Option B
Flashforge, Adventurer 5M Pro
Flashforge Adventurer 5M Pro
The print area is enclosed, and the build volume is 220 × 220 × 220 mm.
- Best for
- Begin with a factory-built enclosure
Facts we checked
- Build space: 220 x 220 x 220 mm
- Automatic color system: Feeds a single material
- Enclosure: Factory-built, with filtration
- Hottest nozzle setting: 280 C
Spec by spec
Where they really differ
| Spec | Flashforge AD5X | Flashforge Adventurer 5M Pro | In practice |
|---|---|---|---|
| Build envelope | 220 x 220 x 220 mm | 220 x 220 x 220 mm | Switching from one of these models to the other doesn't enlarge the nominal part limit. |
| Automatic color system | Four-color IFS included | Single-material feeding | Having a single extruder doesn't mean the color workflow is identical. |
| Enclosure | Open frame in selected package | Factory enclosure with filtration | For the documented materials, the enclosure hardware makes a difference. |
| Maximum nozzle temperature | 300 C | 280 C | A hotter nozzle is no substitute for an enclosure. |
| Material guidance | PLA, PETG and specified TPU or fiber-filled grades | PLA, PETG, ABS and ASA, plus nozzle-dependent options | Look at nozzle and feeder restrictions together with the headline materials. |
Trade-offs
What each pick costs you
With Flashforge AD5X
- The documented single-color workflow is what soft TPU requires.
With Flashforge Adventurer 5M Pro
- With a 280 C nozzle, high-temperature filament profiles need to be checked.
Change of plan
When the answer changes
My projects revolve around four automatic colors
Go with Flashforge AD5X. AD5X ships with IFS.
My ABS or ASA workflow has to be enclosed
Go with Flashforge Adventurer 5M Pro. 5M Pro comes with an enclosure and documented profiles.
My model is a 230 mm square lying flat
Neither model fits. Each would need a changed design or orientation.
Decision guide
How to decide
Four-color prints that work with the included IFS point to the AD5X. The enclosure that comes with the Adventurer 5M Pro, and the ABS or ASA workflows Flashforge lists for it, point the other way. Because both have a 220 mm cube, materials and feeding hardware decide it, not a larger printing area.
A larger machine is not needed for colored labels
For a small sign with colored text, the AD5X changes how colors are fed and keeps the same nominal size limit. The 5M Pro is the choice when the job uses a single material and the enclosure helps. Color transitions still go through one nozzle, so the part design decides how much purging and transition work there is.
ABS changes what the enclosure has to do
The 5M Pro ships in the enclosed configuration documented for ABS housings, and the AD5X reaching 300 C does not turn its open-frame package into an equivalent. Look into ventilation and the precise nozzle guidance for your material. A built-in filter is useful hardware, yet it cannot establish safe room air for every polymer.
Without a redesign, oversized parts rule out both
Neither model can print a 230 mm square flat panel as one piece in that orientation, so you would have to split it, rotate it or switch printers. IFS and the Pro enclosure do nothing for a size constraint, so do not pay for them to fix one. After a redesign makes the object fit, go back to the material and color decision.
What this page can’t tell you
- Print time, purge amount, noise and emissions were not measured for comparison.
By the numbers
What the data shows
What we found across the 3D printers we compare, plus the checked facts behind each finding.
Show the facts and the math
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Flashforge AD5X |
|
|
|
| Flashforge Adventurer 5M Pro |
|
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
Flashforge AD5X
Run four colors through the supplied IFS
See price & reviews on AmazonFlashforge Adventurer 5M Pro
Begin with a factory-built enclosure
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money