Picked for one job

Which receiver suits a low cabinet while keeping the speaker plan intact?

Top pick

Marantz CINEMA 70s

Marantz CINEMA 70s

Start with the original Marantz CINEMA 70s if a 4.3-inch-tall chassis also has to handle 5.1.2 and 4K120. NR1510 is the better choice for a five-speaker 4K60 system that will not change, where the front HDMI input is useful. Neither one can go in without the specified ventilation space.

Why it suits this job

  • Required ventilation along with chassis height
  • Depth once cables are connected
The catch
Even a slim chassis requires room for ventilation and cables.
Go with Marantz NR1510 if
Front HDMI access matters more to you than height channels, 4K60 is enough, and the room will stay at five main speakers.
More reasons we picked it
  • Five or seven main speakers
  • Sources at 4K60 or at 4K120

We may earn a commission from qualifying Amazon purchases. How we make money

Which speaker layouts each slim receiver supports, plus measured chassis height and cable clearance, are compared here for a low cabinet.

Guide updated , Product data updated , Amazon.com / United States

By the numbers

What the data shows

What we found across the AV receivers we compare, plus the checked facts behind each finding.

How many fit

Only 1 of the 34 models checked meet every need here: “Fit into a low AV cabinet” and “Put in two height speakers”.

1 model fits, out of 34 checked
Show the facts and the math
Models in the comparison
34 models
Sources
6 covering these models
Product data updated

How we countedThe count uses each product's current fit ratings for “Fit into a low AV cabinet” and “Put in two height speakers”. A need with no documented match is not counted.

The facts and sources behind each product in this recommendation
ProductNeeds it meetsFacts we checkedSources
Marantz CINEMA 70s
  • Fit in a low cabinet
  • Put in two height speakers
  • 7 main processing channels and 7 built-in amplifier channels
  • Of 6 HDMI inputs, 3 support 4K120 video
  • 1 HDMI output
Marantz NR1510
  • Fit in a low cabinet
  • 5 main processing channels and 5 built-in amplifier channels
  • Of 6 HDMI inputs, 0 support 4K120 video
  • 1 HDMI output

Decision guide

How to choose for this job

Settle the speaker and video capability first, and then check that the whole ventilated installation space works. It is not enough for the chassis to pass through the opening.

01

This shortlist holds two low-profile options

With its antennas horizontal, CINEMA 70s stands 4.3 inches tall. NR1510 is 105mm tall, roughly 4.1 inches. Every other receiver researched is materially taller, so the shortlist is not padded with full-height alternatives. When the cabinet cannot satisfy the manufacturer's clearance instructions, the safer installation decision is to move the receiver.

02

Low height is no promise of shallow depth

NR1510 is roughly 14.9 inches deep, and CINEMA 70s is 15.1 inches deep. Behind either one, leave room for speaker plugs, HDMI cable bends and access. A cabinet door or a solid rear panel can affect both cable fit and airflow. Also keep in mind that the horizontal antenna measurement assumes that orientation suits the installation.

03

Match the channel count and video generation to the job

As a five-channel 4K60 receiver, NR1510 has front-channel pre-outs. CINEMA 70s adds the two extra channels needed for 5.1.2, along with seven full-range pre-outs and three fast HDMI inputs. Four physical heights are not offered by either. Series 2 is its own model with different specifications, so before buying, check that the Amazon listing is the original CINEMA 70s covered here.

Check these before you buy

  • Go through the manufacturer's ventilation guidance first, then measure the opening.
  • Use the real plugs when measuring cable depth.
  • A shortened listing title is not proof, so verify the model is the original CINEMA 70s.

What this page can’t tell you

  • The low-profile chassis criterion is met by two of the researched models, no more. Chassis height by itself is not claimed to prove a safe fit.

2 options

The top pick and the alternatives

01
Marantz CINEMA 70s

Marantz, CINEMA 70s

CINEMA 70s

Seven amplifiers and full 7.2 pre-outs fit into the 4.3-inch-tall chassis of the original slim CINEMA 70s. Use it as the anchor of a low-profile 5.1.2 room, or let it feed a separate power amp.

Top pick ifLow cabinets that also need two height speakers

Key facts

  • 7 main processing channels and 7 built-in amplifier channels
  • Of 6 HDMI inputs, 3 support 4K120 video

The catch

Even a slim chassis requires room for ventilation and cables.

02
Marantz NR1510

Marantz, NR1510

NR1510

Low-profile and five-channel, this receiver offers HEOS, a front HDMI input and front-channel pre-outs. Video tops out at 4K60 over HDMI, which is fine for a modest film and music system.

Pick this instead ifFront HDMI access matters more to you than height channels, 4K60 is enough, and the room will stay at five main speakers.

Key facts

  • 5 main processing channels and 5 built-in amplifier channels
  • Of 6 HDMI inputs, 0 support 4K120 video

The catch

Physical Dolby Atmos height speakers are not supported.

Ready to buy

See today’s price and what owners say

Pick this instead if

Marantz NR1510

Marantz NR1510

Front HDMI access matters more to you than height channels, 4K60 is enough, and the room will stay at five main speakers.

See price & reviews on Amazon

We may earn a commission from qualifying Amazon purchases. How we make money