Side by side

AprilAire E070 vs E100: E100 needs a larger-capacity installation, E070 is easier to place

Quick verdict

E070 fits when its 70-pint rating meets the calculated load and the lower, lighter cabinet or eight-inch connections are important. E100 fits when the design needs its 100-pint capacity and can support the larger cabinet and duct route. E100 adds 30 rated pints but needs ten-inch collars instead of eight-inch ones. Minimum inlet conditions are the same for both, so the larger model is no remedy for an installation that runs too cold.

Before you buy

Why, and what it costs you

A big jump in capacity can mean a bigger installation job

At the stated matched conditions, E100’s 100-pint rating is about 43% above E070’s 70. It also changes from eight-inch to ten-inch collars and puts 8 lb on a taller body. In a crawlspace that is hard to reach, those changes affect delivery, duct connections and later service. The extra rating may go unused if E070 already meets the calculated load. If it does not, pick the larger capacity and do the necessary installation work, and do not choke it back into an unverified old duct path.

Where this comes from

(100 - 70) / 70 comes to about 43%, and that compares capacity ratings only. Changes in collar, height and weight are set against replacement access.

The catch

AprilAire E070 Pro

For a clearly larger load, the lower matched-condition removal rating may not be enough.

The catch

AprilAire E100

The body stands 2.5 inches taller and weighs 8 lb more. Replacement can get complicated by larger connections and service space.

AprilAire E070 Pro

AprilAire E070 Pro

Why pick it
  • The verified load fits within 70 pints, and the access route favors a 12.5-inch-high, 56 lb unit.
  • It is worth preserving an appropriate eight-inch installation.
The catch
For a clearly larger load, the lower matched-condition removal rating may not be enough.
See price & reviews on Amazon
AprilAire E100

AprilAire E100

Why pick it
  • Your calculated load calls for the 100-pint class, and the duct design satisfies its pressure requirements.
  • You are able to supply ten-inch connections along with enough filter and drain access.
The catch
The body stands 2.5 inches taller and weighs 8 lb more. Replacement can get complicated by larger connections and service space.
See price & reviews on Amazon

We may earn a commission from qualifying Amazon purchases. How we make money

Comparison updated , Product data updated , Amazon.com / United States

What this page compares

AprilAire E070 vs E100 for a constrained crawlspace or a larger ducted job, weighed on access, existing ducts and why a bigger rating cannot fix cold inlet air.

Someone sizing a permanent AprilAire installation may be tempted to leap from E070 to E100 for headroom. What is worth asking is whether that headroom suits the building and the installation.

Which one fits

Pick the situations that sound like you

  • Sufficient 70-pint sizing, but hard delivery access

    Lower, narrower and 8 lb lighter describes E070.

    AprilAire E070 Pro
    Better fit
    AprilAire E100
    Caution
  • Ten-inch ducts and 100-pint capacity are what the design calls for

    The higher matched-condition rating belongs to E100.

    AprilAire E070 Pro
    Caution
    AprilAire E100
    Better fit
  • Conditions that fall under the specified inlet limits

    The lower operating boundary is the same for both.

    AprilAire E070 Pro
    Not suitable
    AprilAire E100
    Not suitable
  • The unit, once installed, sits below the disposal point

    A separate, suitable pump is needed for both. Water routing is not changed by a higher daily removal rating.

    AprilAire E070 Pro
    Caution
    AprilAire E100
    Caution

In practice

Differences you will notice

A big jump in capacity can mean a bigger installation job

At the stated matched conditions, E100’s 100-pint rating is about 43% above E070’s 70. It also changes from eight-inch to ten-inch collars and puts 8 lb on a taller body. In a crawlspace that is hard to reach, those changes affect delivery, duct connections and later service. The extra rating may go unused if E070 already meets the calculated load. If it does not, pick the larger capacity and do the necessary installation work, and do not choke it back into an unverified old duct path.

How we worked this out

(100 - 70) / 70 comes to about 43%, and that compares capacity ratings only. Changes in collar, height and weight are set against replacement access.

In winter, the reason for buying the larger label can vanish

For dehumidification, a 50 F minimum inlet temperature and a 40 F minimum dew point are set in both manuals. So a cool crawlspace can pose a placement or operating-envelope problem that E100’s bigger warm-condition rating does not solve. Check the seasonal conditions where air enters the unit. Drainage calls for the same caution. With no onboard pump on either, a higher disposal point still needs a separate solution. Capacity, temperature and water routing all have to fit at the same time.

How we worked this out

Inlet limits both units share and drainage without a pump, set against seasonal cold and an elevated disposal point. Nothing is claimed about performance outside the published conditions.

The service path can outweigh the cabinet difference

On one side, E100 needs 15 inches for filter withdrawal. You can find room for the 14-inch-wide cabinet and still block the movement cleaning requires. E070’s smaller body does not excuse it from its own access instructions, either. Before deciding that either unit fits, sketch where the filter comes out and where someone can reach the drain. That is especially important when the appliance sits behind storage that goes back in place after installation.

How we worked this out

The documented E100 filter withdrawal, set against how storage is really used and a permanent placement. E070 clearance is neither guessed at nor declared smaller.

Option A
AprilAire E070 Pro

AprilAire, E070

E070 Pro

The verified load fits within 70 pints, and the access route favors a 12.5-inch-high, 56 lb unit.

Best for
The verified load fits within 70 pints, and the access route favors a 12.5-inch-high, 56 lb unit.

Facts we checked

  • Matched capacity: 70 pints at 80 F and 60% RH
  • Body height and weight: 12.5 inches, 56 lb
  • Duct connection: Eight-inch collars
  • Cold inlet boundary: 50 F minimum and 40 F minimum dew point
Option B
AprilAire E100

AprilAire, E100 standalone, E100Z package code, no casters or separate controller assumed

E100

Your calculated load calls for the 100-pint class, and the duct design satisfies its pressure requirements.

Best for
Your calculated load calls for the 100-pint class, and the duct design satisfies its pressure requirements.

Facts we checked

  • Matched capacity: 100 pints at 80 F and 60% RH
  • Body height and weight: 15 inches, 64 lb
  • Duct connection: Ten-inch collars
  • Cold inlet boundary: Same limits

Spec by spec

Where they really differ

Where AprilAire E070 Pro and AprilAire E100 differ
SpecAprilAire E070 ProAprilAire E100In practice
Matched capacity70 pints at 80 F and 60% RH100 pints at 80 F and 60% RHA household drying-time ratio cannot be derived from the 30-pint difference.
Body height and weight12.5 inches, 56 lb15 inches, 64 lbMore margin for transport and placement is left by E070.
Duct connectionEight-inch collarsTen-inch collarsReuse of a small duct route calls for a check, and an adapter alone won't do.
Cold inlet boundary50 F minimum and 40 F minimum dew pointSame limitsMore capacity leaves the shared lower boundary in place.

Trade-offs

What each pick costs you

With AprilAire E070 Pro

  • Confirm whether the existing ducts are compatible. Eight-inch collars on their own do not make a whole-system design.

With AprilAire E100

  • The installed total has to include the drain hose, any separate pump and optional controls.

Change of plan

When the answer changes

70-pint sizing is enough, and access is the tougher problem

Go with AprilAire E070 Pro. The smaller, lighter body is E070's.

The larger unit is needed for the verified moisture load, and its installation works

Go with AprilAire E100. The higher capacity comes from E100.

Decision guide

Before you buy

You want enough capacity for the hard season, but without overcomplicating a crawlspace installation that is already awkward.

Check these before you buy

  • Base the sizing on moisture load and inlet conditions and not on floor area alone.
  • Look at the delivery route and the space for pulling the filter.
  • Make sure the installed quote covers duct changes and drainage.

What this page can’t tell you

  • Nothing about a home's size or its occupants is used to infer an exact capacity threshold. A ratio between ratings is not a ratio of speed or efficiency.

By the numbers

What the data shows

What we found across the dehumidifiers we compare, plus the checked facts behind each finding.

Show the facts and the math
Models in the comparison
2 models
Sources
5 covering these models
Product data updated
The facts and sources behind each product in this recommendation
ProductNeeds it meetsFacts we checkedSources
AprilAire E070 Pro
  • The verified load fits within 70 pints, and the access route favors a 12.5-inch-high, 56 lb unit.
  • It is worth preserving an appropriate eight-inch installation.
  • Matched capacity: 70 pints at 80 F and 60% RH
  • Body height and weight: 12.5 inches, 56 lb
  • Duct connection: Eight-inch collars
  • Cold inlet boundary: 50 F minimum and 40 F minimum dew point
AprilAire E100
  • Your calculated load calls for the 100-pint class, and the duct design satisfies its pressure requirements.
  • You are able to supply ten-inch connections along with enough filter and drain access.
  • Matched capacity: 100 pints at 80 F and 60% RH
  • Body height and weight: 15 inches, 64 lb
  • Duct connection: Ten-inch collars
  • Cold inlet boundary: Same limits

Ready to buy

See today’s price and what owners say

Open either model on Amazon for the current price, customer reviews and delivery options.

AprilAire E070 Pro

AprilAire E070 Pro

The verified load fits within 70 pints, and the access route favors a 12.5-inch-high, 56 lb unit.

It is worth preserving an appropriate eight-inch installation.

See price & reviews on Amazon
AprilAire E100

AprilAire E100

Your calculated load calls for the 100-pint class, and the duct design satisfies its pressure requirements.

You are able to supply ten-inch connections along with enough filter and drain access.

See price & reviews on Amazon

Each link opens in a new tab.

We may earn a commission from qualifying Amazon purchases. How we make money