Dreo 711S vs Honeywell TPFIT50PWK Compared: Uphill drainage or remote checks, with Honeywell’s pump reach needing confirmation
Quick verdict
Dreo 711S is the pick for connected phone checks and controls, as long as downhill drainage or manual emptying works. Expect to need an app account, Bluetooth setup, Wi-Fi pairing and a working connection. Honeywell TPFIT50PWK is the pick for a higher drain when local controls are enough, but confirm the route, because the published pump-reach figures conflict. The supplied, unextended tube and a correct pump setup are essential, and that includes checking after outages. Honeywell lists this exact model as discontinued, so verify any remaining-stock offer. Neither base package gives you both advantages or removes the need for physical inspection, cleaning and safe installation.
Before you buy
Why, and what it costs you
With a higher drain, the pump can become the feature that decides
If the sink sits above the outlet, Dreo’s documented gravity route is out unless emptying the tank by hand is acceptable. Honeywell’s pump can handle that rise, but only once the actual route is confirmed despite the conflicting reach figures, and only with the supplied unextended tube and the correct Pump-mode setup. Local controls have to be enough for you. This model is discontinued, so check the condition of any remaining stock. Where the drain runs downhill, the pump no longer decides anything.
Where this comes from
A gravity route is positively specified in Dreo’s manual and exact-model FAQ. Honeywell’s model-specific pump instructions allow a higher drain and tell the pump tube apart from its gravity tube. Because the manufacturer’s reach figures conflict, no numeric installation promise can be made.
The catch
Dreo Dehumidifier 711S
A hose route like the one described cannot climb. Keep it kink-free and at or below the outlet, or plan on regular manual emptying. Drainage trouble is not something a phone can fix.
The catch
Honeywell 50 Pint TP-Fit with Pump
For the pump to work you need the supplied tube on the correct connection, Pump mode enabled, a confirmed route, and checks after outages. Never extend the tube, and never use Pump with the ordinary gravity tube.
DR-HDH001S
Dreo Dehumidifier 711S
Why pick it
Phone checks and controls matter to you, and downhill drainage or manual emptying is workable. Dreo calls for the DREO app and an account, Bluetooth setup, Wi-Fi pairing and a working connection. The whole hose has to stay unkinked, at or below its outlet. Emptying water, clearing blockages and replacing physical checks are all beyond what app access can do.
The catch
A hose route like the one described cannot climb. Keep it kink-free and at or below the outlet, or plan on regular manual emptying. Drainage trouble is not something a phone can fix.
You care more about a higher drain than about phone control. With Honeywell, confirm the route, since published pump-reach figures conflict. Use the supplied, unextended pump tube and the documented Pump-mode setup, and check drainage after outages. This exact model is discontinued, so verify the condition and package of any remaining stock. Inspection and cleaning are still needed.
The catch
For the pump to work you need the supplied tube on the correct connection, Pump mode enabled, a confirmed route, and checks after outages. Never extend the tube, and never use Pump with the ordinary gravity tube.
We may earn a commission from qualifying Amazon purchases. How we make money
Comparison updated , Product data updated , Amazon.com / United States
What this page compares
Dreo 711S phone controls set against Honeywell TPFIT50PWK pump drainage, including connection, hose, placement and upkeep requirements.
Where the collected water can go depends on the drain. Whether you must walk to the machine to change a setting depends on the controls. They are two separate problems, and these exact packages each solve a different one.
Which one fits
Pick the situations that sound like you
My drain runs downhill, and I want to check or adjust the appliance from a phone
A trip to the panel can be skipped with Dreo, once the app account, Bluetooth setup, Wi-Fi pairing and connection are all working. Keep the whole hose free of kinks and at or below the outlet, or else empty the tank by hand. A phone cannot confirm the floor is dry or stand in for physical inspection and cleaning.
Dreo Dehumidifier 711S
Better fit
Honeywell 50 Pint TP-Fit with Pump
Caution
I am fine with local controls, and the drain that suits my setup sits higher than the outlet
For a confirmed higher-drain route, Honeywell’s pump works with its supplied unextended tube and the documented setup. The conflicting reach figures have to be resolved for your own route. You must be satisfied with local controls, and drainage needs checking after outages. Before buying what remains of this discontinued model, inspect its condition and package.
Dreo Dehumidifier 711S
Not suitable
Honeywell 50 Pint TP-Fit with Pump
Better fit
Both are able to drain downhill, and using the local panel is convenient
In this setup you need neither the uphill pump nor phone control. Look at the actual placement, the maintenance and the offers you have chosen. With Honeywell’s ordinary gravity tube, Pump mode has to be off. Dreo’s gravity route does not call for Continuous mode. That the two fit equally well here says nothing about equal moisture removal, noise or efficiency.
Dreo Dehumidifier 711S
Similar
Honeywell 50 Pint TP-Fit with Pump
Similar
The same base package must include both built-in uphill drainage and phone control
Gravity does the draining in Dreo’s documented base kit. Honeywell PWK has a pump, but the Wi-Fi control belongs to AWK and APWK and is not part of it. If both functions are mandatory, you need a different verified model or an external pump researched separately.
Dreo Dehumidifier 711S
Not suitable
Honeywell 50 Pint TP-Fit with Pump
Not suitable
No one is available to inspect the hose, empty a tank when necessary or clean the filter
Hands-on inspection and maintenance are required for both. Removing a blockage or emptying water is beyond Dreo phone control. Honeywell’s pump setup has to be checked after outages, and it cannot promise fault-free drainage. Make sure someone can get to the unit before you depend on either.
Dreo Dehumidifier 711S
Not suitable
Honeywell 50 Pint TP-Fit with Pump
Not suitable
The room falls outside the manual temperature range or has no ventilation and service space
An indoor location outside the manuals’ 41 to 89 degrees Fahrenheit range suits neither one, and neither does a spot lacking the required power, clear airflow, or access for servicing the tank, filter and hose. Honeywell asks for 17.7 inches from obstructing objects. Dreo gives 8 and 12-inch instructions that conflict, so confirm the placement instead of buying for a tight gap. An unsuitable installation is not fixed by a pump or a phone app.
Dreo Dehumidifier 711S
Not suitable
Honeywell 50 Pint TP-Fit with Pump
Not suitable
In practice
Differences you will notice
01
With a higher drain, the pump can become the feature that decides
If the sink sits above the outlet, Dreo’s documented gravity route is out unless emptying the tank by hand is acceptable. Honeywell’s pump can handle that rise, but only once the actual route is confirmed despite the conflicting reach figures, and only with the supplied unextended tube and the correct Pump-mode setup. Local controls have to be enough for you. This model is discontinued, so check the condition of any remaining stock. Where the drain runs downhill, the pump no longer decides anything.
How we worked this out
A gravity route is positively specified in Dreo’s manual and exact-model FAQ. Honeywell’s model-specific pump instructions allow a higher drain and tell the pump tube apart from its gravity tube. Because the manufacturer’s reach figures conflict, no numeric installation promise can be made.
02
A phone can spare a panel visit, though not the service visit
Once app sign-in, Bluetooth setup and Wi-Fi pairing are done and the connection works, Dreo can spare you a panel visit. Humidity on the phone is the appliance’s own reading and not one taken where your phone is. Emptying a tank, inspecting the hose and cleaning filters still mean going there. The Wi-Fi features of AWK and APWK do not carry over to Honeywell PWK. When local controls are convenient, the app advantage fades.
How we worked this out
Dreo’s exact US manual prints the sequence for setting up the app. Its product gallery shows the Humidity tile on the phone along with mode and target controls, yet it does not validate sensor accuracy, update timing or availability off-site. The Wi-Fi-capable suffixes are named explicitly by Honeywell.
03
If you need both features, the shortlist changes
Neither base package offers a built-in uphill drain route and phone control together. Dreo’s app cannot pump water, and no Wi-Fi control is documented for Honeywell PWK. Drop either requirement and a choice opens up again, subject to drainage setup and to the checks on Honeywell’s discontinued stock. Adding an external pump would take separate research into compatibility and cost. And neither one works as unattended ownership when nobody can inspect and clean it.
How we worked this out
Drainage and control follow different paths in the manuals. One complete documented installation has to meet the combined requirement, without lifting a feature from another suffix or from an unverified accessory.
Option A
DR-HDH001S
Dreo, DR-HDH001S
Dehumidifier 711S
Account setup, Bluetooth setup and Wi-Fi pairing come first, and then the Dreo 711S offers app control and an illustrated humidity readout. Its documented hose route depends on gravity, so no part can sit higher than the outlet. Emptying the tank by hand is the alternative, and every setup still needs inspection and cleaning.
Best for
Phone checks and controls matter to you, and downhill drainage or manual emptying is workable. Dreo calls for the DREO app and an account, Bluetooth setup, Wi-Fi pairing and a working connection. The whole hose has to stay unkinked, at or below its outlet. Emptying water, clearing blockages and replacing physical checks are all beyond what app access can do.
Facts we checked
Water that must travel uphill: Documented hose route stays at or below the outlet
Checking and changing it from a phone: DREO app with account and Wi-Fi pairing
A drain below the appliance: Gravity drainage independent of operating mode
What a humidity number means: Appliance reading, also illustrated in the app
The Honeywell TPFIT50PWK offers an uphill pump route and local controls. Connect its supplied pump tube at the correct connection, turn on Pump mode and recheck it after outages. Published reach figures conflict, so confirm the route. Because the manufacturer lists this model as discontinued, look closely at any remaining-stock offer.
Best for
You care more about a higher drain than about phone control. With Honeywell, confirm the route, since published pump-reach figures conflict. Use the supplied, unextended pump tube and the documented Pump-mode setup, and check drainage after outages. This exact model is discontinued, so verify the condition and package of any remaining stock. Inspection and cleaning are still needed.
Facts we checked
Water that must travel uphill: Built-in Auto Drain Pump path for a higher drain
Checking and changing it from a phone: Local controls on this PWK model
A drain below the appliance: Separate gravity tube with Pump mode off
What a humidity number means: Current humidity on the local display
Where Dreo Dehumidifier 711S and Honeywell 50 Pint TP-Fit with Pump differ
Spec
Dreo Dehumidifier 711S
Honeywell 50 Pint TP-Fit with Pump
In practice
Water that must travel uphill
Dreo Dehumidifier 711SDocumented hose route stays at or below the outlet
Honeywell 50 Pint TP-Fit with PumpBuilt-in Auto Drain Pump path for a higher drain
In practiceWhere a properly confirmed pump route is possible, Honeywell can end the need to carry each full tank. For that, the supplied pump tube, the correct connection and Pump mode being enabled are essential. The gravity route described for Dreo cannot climb.
Checking and changing it from a phone
Dreo Dehumidifier 711SDREO app with account and Wi-Fi pairing
Honeywell 50 Pint TP-Fit with PumpLocal controls on this PWK model
In practiceFor a connected status check or a control change, Dreo can save a trip to the panel. Tank emptying and servicing are not something its app takes away. Honeywell’s Wi-Fi instructions are for AWK and APWK, and not for the PWK chosen here.
A drain below the appliance
Dreo Dehumidifier 711SGravity drainage independent of operating mode
Honeywell 50 Pint TP-Fit with PumpSeparate gravity tube with Pump mode off
In practiceUphill pumping stops deciding the choice once the whole route can run downhill. Honeywell’s Pump mode must not be used with its ordinary continuous-drain tube. Whichever discharge you use, secure it and check for leaks and obstruction.
What a humidity number means
Dreo Dehumidifier 711SAppliance reading, also illustrated in the app
Honeywell 50 Pint TP-Fit with PumpCurrent humidity on the local display
In practiceWhat a sensor reads next to the appliance is not a measurement of the whole room, nor proof that every stored item is dry. Having your phone somewhere else does not relocate Dreo’s sensor there. In this comparison, neither source shows better measurement accuracy.
When the installation needs attention
Dreo Dehumidifier 711SFull tank stops operation, with continued filter and tank care
Honeywell 50 Pint TP-Fit with PumpPump setting needs checking after power returns, with continued care
In practiceVisits are still needed for both. A full tank is not cleared by a phone connection, and an automatic restart does not prove Honeywell’s pump resumed correctly. Keep the hoses, tank access and filters within reach.
Trade-offs
What each pick costs you
With Dreo Dehumidifier 711S
To use app control you need an account, Bluetooth setup, Wi-Fi pairing and a working connection. The humidity reading shown in the illustration proves neither room-wide accuracy nor reliable remote alerts.
With Honeywell 50 Pint TP-Fit with Pump
Local controls are what the TPFIT50PWK uses, and the Wi-Fi features of AWK or APWK do not carry over to it. Since the model is discontinued, examine the exact package and condition of the remaining stock.
Change of plan
When the answer changes
Being able to check or change controls by phone is useful, and downhill drainage or manual emptying is workable
Go with Dreo Dehumidifier 711S. That routine works with Dreo only if the app and account, Bluetooth setup, Wi-Fi pairing and a working connection are all in place. Its hose has to stay unkinked at or below the outlet, unless you empty by hand. Leave room in the plan for physical inspection and cleaning.
The drain has to go uphill, and local controls are enough
Go with Honeywell 50 Pint TP-Fit with Pump. The reach figures conflict, so confirm the route with Honeywell, and then use the supplied unextended tube with the documented Pump-mode setup. After outages, check the drainage. This model is discontinued, so verify the condition and package in the remaining-stock offer, and keep up inspection and cleaning.
Uphill pumping and phone control both have to come in the base package
Neither model fits. Phone control comes with gravity drainage on Dreo, and pumping comes without Wi-Fi on Honeywell PWK. You would need another model or an independently verified external-pump setup.
The instructions cannot be met on temperature, power, airflow or service access
Neither model fits. A location outside 41 to 89°F, or one lacking suitable power, airflow and service access, suits neither. Honeywell requires 17.7-inch clearance. Where space is tight, Dreo’s conflicting 8/12-inch instructions call for conservative planning and confirmation.
Decision guide
Before you buy
Sketch the full water route before anything else. After that, decide whether you need to change controls from a phone or are fine with the panel on the appliance.
Check these before you buy
Make sure you are looking at the white US Dreo DR-HDH001S or the Honeywell TPFIT50PWK. PWK is the pump model without the Wi-Fi features that AWK and APWK have. Honeywell lists TPFIT50PWK as discontinued. If you consider remaining stock, check the exact model, its condition, the supplied pump tube and fittings, the seller and the return terms. This page asserts no current price, availability or seller.
Before buying, trace the drain route you intend to use. The product page and the manual of Honeywell give different maximum pump-reach figures, so confirm your actual rise and distance with its support team. Do not extend the supplied pump tube, and do not take its length as a guarantee for every route. The manual and FAQ of Dreo require the highest point of the hose and the drain to stay no higher than its outlet.
To pump with Honeywell, find the Auto Drain Pump outlet and cap in the parts diagram, insert the supplied Auto Drain Pump Tube as shown, put the discharge at a suitable sink or drain and enable Pump mode until its indicator is on. Check the connection and the actual flow of water. After a power outage, verify that Pump mode came back and re-enable it if needed, because a general auto-restart claim does not replace that step.
For gravity drainage with Honeywell, use the separate Direct Drain outlet and an ordinary continuous-drain tube. Angle the tube down with no bends or kinks and secure its end at the drain. Leave Pump mode off when using this tube. Wrong routing or an uneven floor can send water back into the tank and stop operation.
For gravity drainage with Dreo, take the adapter from the tank cover, remove the rear cap, screw in the adapter and attach the supplied hose to a suitable floor drain. The whole hose must sit at or below the outlet, with no kinks. A supported garden hose is an optional alternative and is not supplied. According to the official FAQ, gravity drainage does not require Continuous mode.
To control Dreo from your phone, install the DREO app, sign in or create an account, turn on Bluetooth on the phone for setup and plug in the appliance. Hold the timer button for five seconds to start Wi-Fi pairing, add DH711S and follow the app instructions. Confirm that it connects from where it will be installed. The app must be available and the connection must work. This page promises no particular network band, notification reliability or uninterrupted remote access.
Either model belongs indoors on a level surface, with clear air openings and room to take out its front tank and rear filter. Both manuals give 41 to 89 degrees Fahrenheit as the operating range, and Dreo also specifies relative humidity below 95 percent. Honeywell calls for at least 17.7 inches from obstructing objects. The manual for Dreo says 12 inches on one page and 8 inches on another. Plan around the larger instruction to be safe, and confirm a tight installation with Dreo. This comparison does not establish a smaller operating footprint.
Before first use, let Dreo stand upright for at least six hours. Honeywell instructs at least four hours of upright placement before use, so the refrigerant can settle after transport. Run it on the specified household power supply with no extension cord. Dreo additionally requires a grounded outlet explicitly. Do not put either where water can splash onto it or where its vents get blocked, and do not treat a marketing bathroom scene as approval for an installation.
Before cleaning or servicing, switch off and unplug. Dreo recommends cleaning the filter monthly and drying it completely before refitting, and its manual describes tank cleaning separately. Honeywell recommends cleaning its tank every one to two weeks and its dust filter every two weeks. Follow the exact instructions and keep the drain outlets and hoses clear. Draining through a hose does not remove those maintenance steps.
When you use the bucket, stop and empty it when required, then seat it back correctly. Dreo says to wait several minutes after switching off so water can drain before you pull the tank. Do not remove its float foam. Honeywell expressly warns against moving its appliance with a full tank. A remote humidity display cannot empty water or confirm that the hose and floor are dry.
What this page can’t tell you
What this page compares is features and operating instructions for the exact models. It is not a measured test of moisture removal, noise, energy use or humidity accuracy, and it establishes no superiority in those results.
Neither model is guaranteed to control a particular basement by room-area marketing, differing extraction test conditions or tank size. Moisture entering the space, temperature, airflow and the selected target still matter. No fixed emptying interval or promise of whole-room dryness is made.
An appliance-reported humidity view and controls are what the Dreo app illustration supports. Update frequency, historical-data retention, full-tank alerts, leak alerts, tank-level percentages and availability away from home are not verified by it. The reading does not come from a separate sensor at the phone’s location.
The hose route Dreo positively documents is gravity drainage. No built-in uphill route is established for this model. An external pump would be a separate installation with its own compatibility, service and cost checks.
By the numbers
What the data shows
What we found across the dehumidifiers we compare, plus the checked facts behind each finding.
Show the facts and the math
Models in the comparison
2 models
Sources
5 covering these models
Product data updated
The facts and sources behind each product in this recommendation
Product
Needs it meets
Facts we checked
Sources
Dreo Dehumidifier 711S
Phone checks and controls matter to you, and downhill drainage or manual emptying is workable. Dreo calls for the DREO app and an account, Bluetooth setup, Wi-Fi pairing and a working connection. The whole hose has to stay unkinked, at or below its outlet. Emptying water, clearing blockages and replacing physical checks are all beyond what app access can do.
Water that must travel uphill: Documented hose route stays at or below the outlet
Checking and changing it from a phone: DREO app with account and Wi-Fi pairing
A drain below the appliance: Gravity drainage independent of operating mode
What a humidity number means: Appliance reading, also illustrated in the app
When the installation needs attention: Full tank stops operation, with continued filter and tank care
You care more about a higher drain than about phone control. With Honeywell, confirm the route, since published pump-reach figures conflict. Use the supplied, unextended pump tube and the documented Pump-mode setup, and check drainage after outages. This exact model is discontinued, so verify the condition and package of any remaining stock. Inspection and cleaning are still needed.
Water that must travel uphill: Built-in Auto Drain Pump path for a higher drain
Checking and changing it from a phone: Local controls on this PWK model
A drain below the appliance: Separate gravity tube with Pump mode off
What a humidity number means: Current humidity on the local display
When the installation needs attention: Pump setting needs checking after power returns, with continued care
Open either model on Amazon for the current price, customer reviews and delivery options.
DR-HDH001S
Dreo Dehumidifier 711S
Phone checks and controls matter to you, and downhill drainage or manual emptying is workable. Dreo calls for the DREO app and an account, Bluetooth setup, Wi-Fi pairing and a working connection. The whole hose has to stay unkinked, at or below its outlet. Emptying water, clearing blockages and replacing physical checks are all beyond what app access can do.
You care more about a higher drain than about phone control. With Honeywell, confirm the route, since published pump-reach figures conflict. Use the supplied, unextended pump tube and the documented Pump-mode setup, and check drainage after outages. This exact model is discontinued, so verify the condition and package of any remaining stock. Inspection and cleaning are still needed.