The catch
GE ADHE50PWF
A heavier, deeper body comes in at 44 lb. Cleaning is not removed by the pump.
Side by side
If cabinet width is the tight dimension and the documented 16-foot lift of GE ADHE50PWF fits your route, that is the model to get. If depth or occasional carrying matters more, get Honeywell TPFIT50PWK. Honeywell is 0.85 inch shallower and 3.52 lb lighter. Both are 50-pint pump configurations. Their published hose figures are described differently, so they do not establish a reliable pump-performance winner.
Before you buy
Where GE is 0.95 inch narrower, Honeywell is 0.85 inch shallower. Next to a washer, width may decide whether the cabinet can be placed at all, while along a passage depth may count for more. The airflow, hose and service clearances the manuals require are not part of either measurement. Mark out the whole planned space on the floor, with doors and laundry baskets in their usual positions. Saying flatly that one model is more compact would hide the useful distinction.
Where this comes from
15.35 - 14.4 gives 0.95 inch, and 11.4 - 10.55 gives 0.85 inch. Each model wins on a different body dimension, set against two room layouts.
The catch
A heavier, deeper body comes in at 44 lb. Cleaning is not removed by the pump.
The catch
Its 14-pint bucket is a little smaller. Hose length is not proof of vertical lift.


We may earn a commission from qualifying Amazon purchases. How we make money
GE ADHE50PWF vs Honeywell TPFIT50PWK for an upstairs drain and a crowded laundry area, weighed on body shape, moving weight and misleading hose numbers.
The same uphill drainage problem is solved by these conventional 50-pint pump models. Cabinet orientation and access during ownership are a more useful way to tell them apart than a generic pump badge.
Which one fits
GE is 0.95 inch less wide.
Honeywell has less depth and weighs 3.52 lb less.
Check what is permitted for installation. A headline number is not enough to go on.
A correctly installed pump takes over the job of carrying water. Access is still needed for care of the filter, bucket and drain.
In practice
Where GE is 0.95 inch narrower, Honeywell is 0.85 inch shallower. Next to a washer, width may decide whether the cabinet can be placed at all, while along a passage depth may count for more. The airflow, hose and service clearances the manuals require are not part of either measurement. Mark out the whole planned space on the floor, with doors and laundry baskets in their usual positions. Saying flatly that one model is more compact would hide the useful distinction.
15.35 - 14.4 gives 0.95 inch, and 11.4 - 10.55 gives 0.85 inch. Each model wins on a different body dimension, set against two room layouts.
GE’s body is 44 lb and Honeywell’s is 40.48 lb, so Honeywell is 3.52 lb lighter. If the machine moves between a basement and another room, that may matter, but both are substantial appliances that must be prepared and emptied as instructed. Where the unit stays permanently beside a verified drain, the weight difference matters less. Once the pump arrangement is handling the water, GE’s one-pint bucket advantage also becomes largely irrelevant.
44 - 40.48 gives 3.52 lb. A fixed installation against occasional carrying, together with active pumping, separates the advantages that are useful from those that go unused. No ergonomic or safety threshold is inferred.
In its setup instructions, GE documents a maximum 16-foot lift. Honeywell’s parts list has a 16.4-foot pump tube, and its store copy describes a 15-foot route. These statements are not matched vertical-lift tests, so for a drain near either limit, verify the exact permitted route with the manufacturer before buying. Do not pick Honeywell because 16.4 exceeds 16, or GE because 16 exceeds 15.
Different quantities and wording, set against a high drainage point. Measurement bases that conflict are left out and not ranked.

GE, ADHE50PWF white 50-pint pump
You gain from a narrower cabinet, and the pump route in the GE manual suits the installation.

Honeywell, TPFIT50PWK
The room layout calls for less cabinet depth or a lighter complete unit.
Spec by spec
| Spec | GE ADHE50PWF | Honeywell 50 Pint TP-Fit with Pump | In practice |
|---|---|---|---|
| Removal and pumping | 50-pint rating, internal pump | 50-pint rating, internal pump | Within their instructions, both deal with uphill disposal. |
| Body width and depth | 14.4 W × 11.4 D inches | 15.35 W × 10.55 D inches | GE has less width, Honeywell less depth. |
| Weight | 44 lb | 40.48 lb | Before water, Honeywell weighs 3.52 lb less. |
| Pump number | Manual maximum lift 16 feet | Parts list 16.4-foot hose, store describes a 15-foot route | Maximum vertical lift is a different quantity from hose length. |
Trade-offs
Change of plan
Go with GE ADHE50PWF. The narrower body is GE's.
Go with Honeywell 50 Pint TP-Fit with Pump. Honeywell has less depth and less weight.
Decision guide
You need a pump-equipped unit that fits around your laundry routine, and hose length should not be mistaken for lifting power.
By the numbers
What we found across the dehumidifiers we compare, plus the checked facts behind each finding.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| GE ADHE50PWF |
|
| |
| Honeywell 50 Pint TP-Fit with Pump |
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

You gain from a narrower cabinet, and the pump route in the GE manual suits the installation.
The 15-pint bucket comes in handy when you use collection mode temporarily.
See price & reviews on Amazon
The room layout calls for less cabinet depth or a lighter complete unit.
Your drainage route suits the verified PWK pump configuration.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money