The catch
Midea Cube 20 Pint
Carrying the nested Cube with water in the reservoir is awkward.
Side by side
A selectable bucket fill level and a larger maximum selected reservoir are the reasons to pick the Midea Cube 20. Energy tracking and a conventional tank routine are the reasons to pick the Dreo 733S. Their comparable extraction ratings are close, so what decides it is how you will drain, carry and schedule the machine.
Before you buy
Under Appendix X1, the exact DR-HDH003S record for Dreo shows 22.09 pints/day. Next to the Cube's 20-pint class, that comes to only roughly 10% more rated removal. It is nowhere near several times more.
Where this comes from
(22.09 - 20) / 20 = 10.45%. Different conditions apply to the 73-pint promotional measure.
The catch
Carrying the nested Cube with water in the reservoir is awkward.
The catch
Its 73-pint headline was set under hot, saturated conditions instead of the current federal test.


We may earn a commission from qualifying Amazon purchases. How we make money
Midea Cube 20 and Dreo 733S compared on adjustable bucket weight, energy tracking and removal capacity on a comparable basis.
A selectable bucket fill level and a larger maximum selected reservoir are the reasons to pick the Midea Cube 20. Energy tracking and a conventional tank routine are the reasons to pick the Dreo 733S. Their comparable extraction ratings are close, so what decides it is how you will drain, carry and schedule the machine.
Which one fits
Choosing the Cube's fill level lets you cap the carrying load.
Level 4 on the Cube gets to three gallons.
The Dreo has energy and cost tracking in its app.
On a comparable basis the Dreo is rated at 22.09 pints.
Set up a suitable drain or use a different arrangement, and do not count on bucket size.
In practice
Under Appendix X1, the exact DR-HDH003S record for Dreo shows 22.09 pints/day. Next to the Cube's 20-pint class, that comes to only roughly 10% more rated removal. It is nowhere near several times more.
(22.09 - 20) / 20 = 10.45%. Different conditions apply to the 73-pint promotional measure.
Set to its highest level, the Cube holds 1.15 gallons more than the Dreo, which is 9.2 US pints. Set to its lowest, it holds 0.35 gallon less. The fill-level setting therefore tells you more than ranking tanks by size alone.
3 - 1.85 = 1.15 gallons, then 1.15 × 8 = 9.2 pints. And 1.85 - 1.5 = 0.35 gallon.
From its highest level to its lowest, Midea's approximate load drops from 29.5 to 17 pounds. If you will be carrying water up a step or across a bedroom, decide whether even the lower load is manageable.
Using the manufacturer's approximate filled-bucket table, 29.5 - 17 = 12.5 pounds less to carry at the lower setting.

Midea, MAD20S1QWT
For a 20-pint model, this small smart Cube has a surprisingly large lift-off bucket.

Dreo, DR-HDH003S
A generous seven-liter tank and tuning for quieter medium-room use define this newer compact smart model.
Spec by spec
| Spec | Midea Cube 20 Pint | Dreo Dehumidifier 733S | In practice |
|---|---|---|---|
| Comparable daily extraction | 20 pints | 22.09 pints in the ENERGY STAR Appendix X1 record | Normalized, the Dreo's advantage comes to about 10%, and not the ratio its 73-pint promotional figure suggests. |
| Maximum selected tank storage | 3 gallons at Cube level 4 | 1.85 gallons | If its filled weight is manageable, the Cube can hold more water before each trip. |
| Selectable lower fill | 1.5 gallons at Cube level 1 | No equivalent selectable fill level documented | On the Cube you can give up some storage to carry less. |
| Approximate Cube carrying load | 17 lb at level 1, 29.5 lb at level 4 | Filled-bucket weight not established here | Weigh capacity and lifting effort as a pair. |
| Continuous drain | Gravity, including manual's bucketless setup | Gravity drain with included hose | Do not assume a sink above the outlet will work. |
| App tools | Connected humidity controls | Connected controls plus energy and cost tracking | You can see more about the energy a running schedule uses with Dreo. |
Trade-offs
Change of plan
Go with Midea Cube 20 Pint. Several fill levels are documented for the Cube.
Go with Dreo Dehumidifier 733S. The 733S comes with energy and cost tracking.
Decision guide
The Midea Cube 20 earns its place with a selectable bucket fill level and a larger maximum selected reservoir. The Dreo 733S earns its place with energy tracking and a conventional tank routine. The comparable extraction ratings are close, so the choice comes down to how you will drain, carry and schedule the machine.
There is only a relatively small difference in normalized extraction. An adjustable reservoir changes the carrying task on the Cube, and the app tools on the Dreo make energy use easier to inspect. Those are more concrete reasons to buy than the larger promotional pint number.
Level 4 on the Cube means fewer interruptions but a heavier container. When you have to cross a sleeping area or negotiate a step, a lower level may be the sensible everyday setting. The right choice depends on who does the emptying.
If you sleep in the daytime, a schedule can shift some operation to other hours, but only when humidity stays controlled during the break. Energy tracking on the Dreo can help you inspect that routine. Neither set of specifications proves which machine sounds better at the same removal rate.
By the numbers
What we found across the dehumidifiers we compare, plus the checked facts behind each finding.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Midea Cube 20 Pint |
|
|
|
| Dreo Dehumidifier 733S |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

You want the choice of a lighter bucket or fewer emptying trips
See price & reviews on Amazon
Monitoring energy use in the app appeals to you
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money