The catch
Midea Cube 20 Pint
Carrying the nested Cube with water in the reservoir is awkward.
Side by side
A 20-pint unit that would be undersized for your moisture load calls for the Frigidaire FHDD3534Y1. When removal needs are modest and selectable bucket weight matters more, the Midea Cube 20 is the better choice. The Frigidaire removes more per rated day in a smaller cabinet footprint, and the Cube can hold more water between trips.
Before you buy
Rated removal goes from 20 to 35 pints per day with the Frigidaire, which holds only 1.7 gallons. The Cube can be set to stop at a three-gallon fill level, so extraction speed and the time between carrying trips pull in different directions.
Where this comes from
35 / 20 = 1.75. At level 4 the Cube holds 3 gallons, and the Frigidaire holds 1.7 gallons.
The catch
Carrying the nested Cube with water in the reservoir is awkward.
The catch
It has no way to pump water uphill.


We may earn a commission from qualifying Amazon purchases. How we make money
Midea Cube 20 and Frigidaire FHDD3534Y1 compared on heavier moisture, bucket weight, cabinet footprint and drain access.
A 20-pint unit that would be undersized for your moisture load calls for the Frigidaire FHDD3534Y1. When removal needs are modest and selectable bucket weight matters more, the Midea Cube 20 is the better choice. The Frigidaire removes more per rated day in a smaller cabinet footprint, and the Cube can hold more water between trips.
Which one fits
Frigidaire's rating is 35 pints/day. It is not rated at 20.
At its highest selection the Cube stores more, but the load to carry is heavier.
Depth of the Frigidaire cabinet is 11.1 inches.
A lower fill level can be selected on the Cube, but even 17 lb might be too much.
Lift is not something a gravity setup provides.
In practice
Rated removal goes from 20 to 35 pints per day with the Frigidaire, which holds only 1.7 gallons. The Cube can be set to stop at a three-gallon fill level, so extraction speed and the time between carrying trips pull in different directions.
35 / 20 = 1.75. At level 4 the Cube holds 3 gallons, and the Frigidaire holds 1.7 gallons.
Against the Cube's 181, the Frigidaire cabinet footprint is about 163 square inches. It delivers the higher rated removal in roughly 10% less cabinet area. That figure leaves out ventilation and bucket access.
Areas: 14.7 × 11.1 = 163.17 and 13.50 × 13.39 = 180.77. That is a 9.7% reduction in area.
If the sink is across the apartment, the Cube's manual numbers matter: about 29.5 pounds at the highest fill level and 17 pounds at the lowest. Go with the lower setting or a proper drain route, and don't count maximum storage as a benefit by default.
The manufacturer's approximate weights for a filled bucket at levels 4 and 1. Nothing in the comparison sets a safe lifting weight for any individual.

Midea, MAD20S1QWT
For a 20-pint model, this small smart Cube has a surprisingly large lift-off bucket.

Frigidaire, FHDD3534Y1
This current 35-pint unit is quiet and efficient, offers three fan speeds and has app control that is useful.
Spec by spec
| Spec | Midea Cube 20 Pint | Frigidaire 35 Pint Wi-Fi Dehumidifier | In practice |
|---|---|---|---|
| Daily removal rating | 20 pints | 35 pints | Rated removal capacity is 75% higher on the Frigidaire. |
| Nominal or maximum selected water storage | Up to 3 gallons at Cube fill level 4 | 1.7 gallons | A bigger extraction rating says nothing about a larger bucket. |
| Selected bucket levels and approximate load | Level 1: 1.5 gal / 17 lb. Level 4: 3 gal / 29.5 lb | No selectable fill weight documented here | With the Cube you balance carrying load against how often you empty. |
| Cabinet width and depth | 13.50 × 13.39 inches | 14.7 × 11.1 inches | Less depth on the Frigidaire comes at the price of a little extra width. |
| Connected operation | App control | App schedules and fan adjustment | A work-and-sleep routine works with both of them. |
| Drain arrangement | Gravity drain with bucketless option | Continuous drain option | Do not assume that either arrangement can raise water to an elevated drain. |
Trade-offs
Change of plan
Go with Frigidaire 35 Pint Wi-Fi Dehumidifier. Frigidaire's rating is 35 pints/day.
Go with Midea Cube 20 Pint. You decide how full the bucket gets on the Cube.
Decision guide
If a 20-pint unit would be undersized for the moisture load, go with the Frigidaire FHDD3534Y1. If removal needs are modest and selectable bucket weight counts for more, go with the Midea Cube 20. Per rated day the Frigidaire removes more in a smaller cabinet footprint, while the Cube can hold more water between trips.
Inadequate extraction is not made up for by a large bucket. A laundry space that stays damp may need the higher rated capacity of the Frigidaire. The Cube makes more sense where its output is sufficient and the daily chore is mostly managing the collected water.
With the Cube you can trade emptying frequency against load. Its largest setting is a heavy carry. Under a demanding load the smaller bucket of the Frigidaire may fill sooner, so find out whether a suitable continuous drain is available before you choose.
A shallower Frigidaire can help in an apartment hallway or a utility corner. Neither should be pushed tightly into a cupboard. Leave ventilation space and a clear path for taking out water, so you never lift a full container over furniture.
By the numbers
What we found across the dehumidifiers we compare, plus the checked facts behind each finding.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Midea Cube 20 Pint |
|
|
|
| Frigidaire 35 Pint Wi-Fi Dehumidifier |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

A 20-pint unit is enough for the room
See price & reviews on Amazon
Your moisture load is large enough to call for 35-pint capacity
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money