The catch
Kuvings REVO830
You still have to follow this model's ingredient preparation rules, whatever the feed chute makes easier.
Side by side
If you want to simplify the preparing and feeding of celery or carrots, the REVO830 is the better match. If you would rather load a whole prepared recipe into a hopper before you start, the AUTO10 is.
Before you buy
The REVO830 can suit a celery-heavy routine, since its dedicated entry cuts suitable stalks as they feed. The AUTO10 can suit a mixed recipe that is already prepared, because the ingredients all load at once. Each saves a different kind of preparation, so a hands-free label alone does not make either one the winner.
Where this comes from
For suitable carrots and celery, the REVO830 documents a 1.75-inch Auto-Cut chute. A 3 L self-feeding hopper is what the AUTO10 documents.
The catch
You still have to follow this model's ingredient preparation rules, whatever the feed chute makes easier.
The catch
The 3 L figure covers how much produce fits. It does not tell you how much juice you get.


We may earn a commission from qualifying Amazon purchases. How we make money
Feeding routine, height and the practical limits that decide which juicer fits your daily routine, compared for the Kuvings REVO830 vs AUTO10.
If you want to simplify the preparing and feeding of celery or carrots, the REVO830 is the better match. If you would rather load a whole prepared recipe into a hopper before you start, the AUTO10 is.
Which one fits
The REVO830 has the dedicated stalk-cutting entry.
The 3 L hopper belongs to the AUTO10.
The listed weights match exactly.
The AUTO10 alone passes the closed-height check.
In practice
The REVO830 can suit a celery-heavy routine, since its dedicated entry cuts suitable stalks as they feed. The AUTO10 can suit a mixed recipe that is already prepared, because the ingredients all load at once. Each saves a different kind of preparation, so a hands-free label alone does not make either one the winner.
For suitable carrots and celery, the REVO830 documents a 1.75-inch Auto-Cut chute. A 3 L self-feeding hopper is what the AUTO10 documents.
The AUTO10 is one inch shorter in listed height, but both weigh 16.5 lb. In a small kitchen the lower height may help with storage, while carrying is about the same job. Leave room above either one for loading and taking parts out.
The REVO830 stands 19 inches and the AUTO10 18 inches. Both list 16.5 lb.
Documented smoothie and frozen-dessert accessory paths exist for both. When those are occasional treats, the deciding question goes back to weekday loading. Look at the exact contents of the Amazon box so you do not pay for an accessory the other model already includes.
Smoothie and dessert strainers appear in the exact manufacturer included-part lists for both. The comparison claims no texture or yield test.

Kuvings, REVO830
If cutting up fibrous stalks is the step in your routine you want to change, the separate Auto-Cut entry is the feature to look at.

Kuvings, AUTO10
Separate strainers are included for juice, smoothies and frozen-fruit desserts, and the hopper takes a larger prepared recipe.
Spec by spec
| Spec | Kuvings REVO830 | Kuvings AUTO10 | In practice |
|---|---|---|---|
| Feeding routine | 3.5-inch chute plus 1.75-inch Auto-Cut entry | 3 L self-feeding hopper | One is aimed at stalk preparation and the other at repeated feeding. |
| Height | 19 inches | 18 inches | Before opening clearance, the AUTO10 stands one inch lower. |
| Weight | 16.5 lb | 16.5 lb | No lifting advantage is listed for either. |
| Included recipe inserts | Smoothie and sorbet strainers | Juice, smoothie and blank strainers | Check the package you chose, so you do not pay to close an accessory gap that does not exist. |
Trade-offs
Change of plan
Go with Kuvings REVO830. Preparing suitable fibrous stalks is what the separate 1.75-inch Auto-Cut entry is for.
Go with Kuvings AUTO10. Its 3 L hopper lets the AUTO10 take a prepared recipe, so you skip the same feed-chute routine.
Neither model fits. For both models, pits, unsuitable ingredients and model-specific preparation rules still count.
Decision guide
Simplifying celery or carrot preparation and feeding points to the REVO830. Preferring to load a whole prepared recipe into a hopper before starting points to the AUTO10.
The REVO830 can suit a celery-heavy routine, since its dedicated entry cuts suitable stalks as they feed. The AUTO10 can suit a mixed recipe that is already prepared, because the ingredients all load at once. Each saves a different kind of preparation, so a hands-free label alone does not make either one the winner.
The AUTO10 is one inch shorter in listed height, but both weigh 16.5 lb. In a small kitchen the lower height may help with storage, while carrying is about the same job. Leave room above either one for loading and taking parts out.
Documented smoothie and frozen-dessert accessory paths exist for both. When those are occasional treats, the deciding question goes back to weekday loading. Look at the exact contents of the Amazon box so you do not pay for an accessory the other model already includes.
By the numbers
What we found across the juicers we compare, plus the checked facts behind each finding.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Kuvings REVO830 |
|
| |
| Kuvings AUTO10 |
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Your recipes are mostly celery and carrots
See price & reviews on Amazon
Loading prepared ingredients all in one go appeals to you
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money