The catch
Brother PT-M95
Laminated TZe tape will not fit it.
Side by side
PT-M95 is for short labels that stay dry and indoors. PT-H110 is for when laminated TZe media or a cable-label layout matters. Each accepts 12 mm tape, yet the M95 runs on a different tape family and states a smaller print height.
Before you buy
If you already own TZe cassettes, H110 is the better pick over M95. Both are rated 12 mm, yet M95 takes non-laminated M media. Cassette family is a strict compatibility requirement. Read the letters on your existing supplies before you assume the lower-priced printer can stand in.
Where this comes from
Match the cassette family to the media you own. A shared width does not show that cassettes are compatible.
The catch
Laminated TZe tape will not fit it.
The catch
Its screen is not backlit.


We may earn a commission from qualifying Amazon purchases. How we make money
Brother PT-M95 vs PT-H110 for folder labels, cables and home storage. See how non-laminated M tape stacks up against TZe options, and check how much text area prints.
PT-M95 is for short labels that stay dry and indoors. PT-H110 is for when laminated TZe media or a cable-label layout matters. Each accepts 12 mm tape, yet the M95 runs on a different tape family and states a smaller print height.
Which one fits
A simple indoor organizing job is covered by non-laminated M tape.
The M95 offers local text entry in a compact body.
The H110 accepts TZe cassettes. It does not take M cassettes.
The H110 documents a layout for cable labels.
In practice
If you already own TZe cassettes, H110 is the better pick over M95. Both are rated 12 mm, yet M95 takes non-laminated M media. Cassette family is a strict compatibility requirement. Read the letters on your existing supplies before you assume the lower-priced printer can stand in.
Match the cassette family to the media you own. A shared width does not show that cassettes are compatible.
The M95 specifies an 8 mm maximum print height, and the H110 specifies 9 mm. That gives H110 12.5 percent more maximum printed height even though both top out at 12 mm media. A layout may get more room from that, but it does not promise 12.5 percent greater readability or any particular font size.
(9-8)/8=12.5 percent. This calculation covers maximum printable height and nothing else.
Compatible laminated TZe options exist for H110 and not for M95. So H110 is the better place to start when handling or splashes point you to laminated media. You still need to check the exact cassette against the surface, the temperature and the cleaning method. A description of the tape family does not stretch into blanket dishwasher or freezer approval, and we do not claim it does.
What has been verified is a difference in laminated-tape compatibility. How well it suits real exposure still depends on the tape you select.

Brother, PT-M95
A lightweight keyboard unit for short indoor labels.

Brother, PT-H110
Handheld typing for labels, with a cable-label layout for cords.
Spec by spec
| Spec | Brother PT-M95 | Brother PT-H110 | In practice |
|---|---|---|---|
| Tape family | Non-laminated M | TZe including laminated options | A cassette purchased for one will not necessarily fit the other. |
| Maximum tape | 12 mm | 12 mm | The nominal width is the same. |
| Print height | 8 mm | 9 mm | Stated maximum printed height is 1 mm more on the H110. |
| Cable layout | General labeling | Dedicated cable-label function | The function helps with formatting, and the tape you choose determines whether it suits the application. |
Trade-offs
Change of plan
Go with Brother PT-H110. H110 belongs to that family, M95 does not.
Go with Brother PT-M95. The M95 handles that simple job.
Neither model fits. Neither model has verified support for the exact sleeve.
Decision guide
Dry, indoor, short labels suit PT-M95. Laminated TZe media or a cable-label layout makes PT-H110 the better choice. The 12 mm tape limit is the same on both, but the M95 takes a different tape family and lists a smaller print height.
If you already own TZe cassettes, H110 is the better pick over M95. Both are rated 12 mm, yet M95 takes non-laminated M media. Cassette family is a strict compatibility requirement. Read the letters on your existing supplies before you assume the lower-priced printer can stand in.
The M95 specifies an 8 mm maximum print height, and the H110 specifies 9 mm. That gives H110 12.5 percent more maximum printed height even though both top out at 12 mm media. A layout may get more room from that, but it does not promise 12.5 percent greater readability or any particular font size.
Compatible laminated TZe options exist for H110 and not for M95. So H110 is the better place to start when handling or splashes point you to laminated media. You still need to check the exact cassette against the surface, the temperature and the cleaning method. A description of the tape family does not stretch into blanket dishwasher or freezer approval, and we do not claim it does.
By the numbers
What we found across the label printers we compare, plus the checked facts behind each finding.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Brother PT-M95 |
|
| |
| Brother PT-H110 |
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Dry indoor folders are all you label, and non-laminated M tape handles that simple indoor organizing.
See price & reviews on Amazon
You need laminated tape that fits. H110 takes TZe cassettes. It does not accept M cassettes.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money