The catch
TP-Link Deco BE67 3-pack
A gigabit-only home gets little out of the higher radio rate and 10Gbps hardware.
Side by side
Deco BE67 vs Deco BE85: BE85 holds 10Gb at both ends of a node, whereas BE67 has a single 10Gb uplink
Quick verdict
A network that needs 10Gbps on both sides of a node, or can use higher-stream BE22000 radios, is the one for BE85. One 10Gbps uplink in a typical multi-gig home is within what BE67 can handle.
Before you buy
Why, and what it costs you
The catch
TP-Link Deco BE85 3-pack
Ordinary one-gigabit service does not call for this cost or the aggregate BE22000 rating.
TP-Link Deco BE67 3-pack
- Why pick it
- A single 10Gbps path removes the bottleneck
- Everything else runs at 2.5Gbps
- The catch
- A gigabit-only home gets little out of the higher radio rate and 10Gbps hardware.
TP-Link Deco BE85 3-pack
- Why pick it
- You can make use of two 10Gbps links per node
- The node serves a fast NAS and a switch
- The catch
- Ordinary one-gigabit service does not call for this cost or the aggregate BE22000 rating.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
10Gbps networking comes with these high-end Deco Wi-Fi 7 systems.
This one comes down to radio class and 10gbps ports first, then to the limits of your own setup.
Day to day
How each one fits your routine
The far end needs a second fast socket for a workstation
BE67 has only one 10GbE socket, and a 10GbE backhaul cable uses it up, so the workstation connection is left at 2.5GbE or below. BE85 can set aside its second 10GbE connection for that workstation. Choose BE85 for this specific local-data route only if the computer, upstream switch and storage can use it. Choose BE67 when a 2.5GbE endpoint already meets the need and fewer sockets will do.
Where this comes from
On the BE85, the combo RJ45/SFP+ interface counts as one connection, while this scenario needs two separate 10GbE connections at the satellite.
With three ordinary room devices, the switch budget shifts
Beside a wired satellite, a television, console and small server need four total connections including backhaul. BE85 can supply them directly, but BE67 needs a local switch or one wireless device. The difference can matter even on ordinary broadband. Choose BE85 if getting rid of the extra powered switch justifies the larger purchase, or keep BE67 when a suitable room switch is already available.
Where this comes from
BE85 gives four independent Ethernet connections to BE67's three. The calculation is about connection count and does not assume that the devices saturate their links.
Which one fits
Pick the situations that sound like you
Daily use means video calls and remote work
As the household gets busy, its backhaul options and traffic controls help a work device stay connected.
- TP-Link Deco BE67 3-pack
- Better fit
- TP-Link Deco BE85 3-pack
- Good
A lot of devices stay connected in my household
A busy network suits its radio capacity and manufacturer device guidance, depending on how much traffic each device generates.
- TP-Link Deco BE67 3-pack
- Good
- TP-Link Deco BE85 3-pack
- Better fit
I require 10Gbps Ethernet
TP-Link Deco BE67 3-pack lists “BE14000” for radio class, while TP-Link Deco BE85 3-pack lists “BE22000”. For radio class, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup.
- TP-Link Deco BE67 3-pack
- Similar
- TP-Link Deco BE85 3-pack
- Similar
My wired devices run at 2.5Gbps or 5Gbps
TP-Link Deco BE67 3-pack lists “Available” for 2.5gbps ports, while TP-Link Deco BE85 3-pack lists “Two per node”. For 2.5gbps ports, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup.
- TP-Link Deco BE67 3-pack
- Similar
- TP-Link Deco BE85 3-pack
- Similar
Gaming latency needs to be low and stable
TP-Link Deco BE67 3-pack lists “One-class path” for 10gbps ports, while TP-Link Deco BE85 3-pack lists “Two per node”. For 10gbps ports, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup.
- TP-Link Deco BE67 3-pack
- Similar
- TP-Link Deco BE85 3-pack
- Similar
Plug in your setup
Can this mesh kit handle your wired layout?
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
TP-Link Deco BE67 3-pack
Passes these checksThe ports cover this 2-node wired layout with 0 gateway LAN ports to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
TP-Link Deco BE85 3-pack
Passes these checksThe ports cover this 2-node wired layout with 1 gateway LAN port to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.
Option A
TP-Link, Deco BE67
Deco BE67 3-pack
This tri-band BE14000 mesh pairs 10Gbps networking with a fast set of 6 GHz radios.
- Best for
- A single 10Gbps path removes the bottleneck
Facts we checked
- Radio class: BE14000
- 10Gbps ports: One-class path
- 2.5Gbps ports: Available
- The BE67's sockets are one 10GbE, one 2.5GbE and one gigabit.
Option B
TP-Link, Deco BE85
Deco BE85 3-pack
Each node of this flagship-class BE22000 mesh carries two 10Gbps ports, two 2.5Gbps ports and USB.
- Best for
- You can make use of two 10Gbps links per node
Facts we checked
- Radio class: BE22000
- 10Gbps ports: Two per node
- 2.5Gbps ports: Two per node
- The BE85 has two 2.5GbE ports and two 10GbE connections, one of which is an RJ45/SFP+ combo.
Spec by spec
Where they really differ
| Spec | TP-Link Deco BE67 3-pack | TP-Link Deco BE85 3-pack | In practice |
|---|---|---|---|
| Radio class | BE14000 | BE22000 | For radio class, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup. |
| 10Gbps ports | One-class path | Two per node | For 10gbps ports, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup. |
| 2.5Gbps ports | Available | Two per node | For 2.5gbps ports, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup. |
Trade-offs
What each pick costs you
With TP-Link Deco BE67 3-pack
- You buy premium HomeShield functions separately from the hardware.
With TP-Link Deco BE85 3-pack
- HomeShield Security+ or Total is still needed for several security and parental features.
By the numbers
What the data shows
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
Show the facts and the math
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| TP-Link Deco BE67 3-pack |
|
| |
| TP-Link Deco BE85 3-pack |
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
TP-Link Deco BE67 3-pack
A single 10Gbps path removes the bottleneck
See price & reviews on AmazonTP-Link Deco BE85 3-pack
You can make use of two 10Gbps links per node
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money