The catch
TP-Link Deco BE67 3-pack
A gigabit-only home gets little out of the higher radio rate and 10Gbps hardware.
Side by side
TP-Link Deco BE67 vs eero Pro 7: 10Gb internet goes into Deco, and eero balances one client’s wired path at 5Gb
Quick verdict
A 10Gb internet entry point and an extra socket point to Deco BE67. For one wired client that needs a balanced 5Gb path, eero Pro 7 is the better fit.
Before you buy
Why, and what it costs you
Tally the gateway sockets that are free
Each directly wired satellite or device uses one more. Once the internet cable is in, eero Pro 7 leaves 1 gateway LAN socket and Deco BE67 leaves 2.
Where this comes from
Free ports on an auto-sensing gateway = physical ports minus one WAN allocation. Models with a dedicated WAN use their documented LAN inventory. Inputs: 10Gb + 2.5Gb + 1Gb and 5Gb + 5Gb.
The catch
eero Pro 7 3-pack
Without 6 GHz clients, the three-pack is a lot more expensive than dual-band eero 7.
TP-Link Deco BE67 3-pack
- Why pick it
- WAN socket must be 10Gb
- You want a gigabit connection to spare
- The catch
- A gigabit-only home gets little out of the higher radio rate and 10Gbps hardware.
eero Pro 7 3-pack
- Why pick it
- The downstream wired connection must be 5Gb
- You like two matching 5Gb sockets
- The catch
- Without 6 GHz clients, the three-pack is a lot more expensive than dual-band eero 7.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
A 10Gb internet entry point and an extra socket point to Deco BE67. For one wired client that needs a balanced 5Gb path, eero Pro 7 is the better fit.
A faster incoming link is what BE67 takes
Which one fits
Pick the situations that sound like you
WAN socket must be 10Gb
Its 10Gb port can serve as WAN, which leaves 2.5Gb and 1Gb for downstream devices. The incoming capacity may be shared across several connections, though no single wired client inherits the 10Gb headline.
- TP-Link Deco BE67 3-pack
- Better fit
- eero Pro 7 3-pack
- Not suitable
Hold a 5 Gb wired client link once a 5 Gb or faster WAN link is in use
A 5Gb modem connection and a 5Gb client are both supported by its two ports. If you need more wired branches, a compatible switch is required.
- TP-Link Deco BE67 3-pack
- Not suitable
- eero Pro 7 3-pack
- Better fit
Look at the whole setup
When a BE67 satellite uses its 10Gb port for the uplink, a local client gets 2.5Gb. Pro 7 can put one 5Gb socket on each leg. Treat these as link ceilings. They are not measured transfer rates.
- TP-Link Deco BE67 3-pack
- Depends
- eero Pro 7 3-pack
- Depends
Have a 5 Gb client port left over after a wired upstream link of 5 Gb or more
After a 5Gb upstream link, Pro 7 leaves a 5Gb port. BE67 offers up to 2.5Gb to a wired client once its 10Gb port is used upstream.
- TP-Link Deco BE67 3-pack
- Not suitable
- eero Pro 7 3-pack
- Better fit
In practice
Differences you will notice
Tally the gateway sockets that are free
Each directly wired satellite or device uses one more. Once the internet cable is in, eero Pro 7 leaves 1 gateway LAN socket and Deco BE67 leaves 2.
How we worked this out
Free ports on an auto-sensing gateway = physical ports minus one WAN allocation. Models with a dedicated WAN use their documented LAN inventory. Inputs: 10Gb + 2.5Gb + 1Gb and 5Gb + 5Gb.
Follow the cable's route through the satellite
Once the fastest documented uplink is allocated, eero Pro 7 retains a client socket up to 5Gb and Deco BE67 up to 2.5Gb. This downstream limit cannot be removed by a faster WAN.
How we worked this out
Set aside the documented satellite uplink, or the fastest auto-sensing socket, and then take the maximum speed among the remaining ports. Satellite inventories: 10Gb + 2.5Gb + 1Gb and 5Gb + 5Gb. Before overhead, link rates are ceilings.
A slower desktop link can remain even with the faster WAN label
After a 5Gb upstream link, Pro 7 leaves a 5Gb port. BE67 offers up to 2.5Gb to a wired client once its 10Gb port is used upstream.
How we worked this out
Allocate the fastest port upstream, then compare the fastest remaining port. BE67 inventory [10,2.5,1], Pro 7 [5,5].
Plug in your setup
Can this mesh kit handle your wired layout?
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
TP-Link Deco BE67 3-pack
Passes these checksThe ports cover this 2-node wired layout with 0 gateway LAN ports to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
eero Pro 7 3-pack
Fails these checksThe gateway does not have enough ports at your chosen speeds for your internet line, 1 direct node link and 1 wired device. A suitable external switch could change that.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.
Option A
TP-Link, Deco BE67
Deco BE67 3-pack
This tri-band BE14000 mesh pairs 10Gbps networking with a fast set of 6 GHz radios.
- Best for
- A 10Gbps gateway or switch paired with multi-gig internet
Facts we checked
- BE14000 is a tri-band design with Wi-Fi 7, and MLO works across compatible links.
- Ethernet connectivity comes in a mix of 10Gbps and 2.5Gbps.
- Compatible Wi-Fi 7 clients can use 320 MHz channels on the 6 GHz radio.
Option B
eero, M013111
eero Pro 7 3-pack
Each node of this tri-band BE10800 mesh offers 6 GHz and two 5Gbps Ethernet ports.
- Best for
- Five-gigabit wiring and 6 GHz on a busy eero network
Facts we checked
- MLO is supported across the tri-band 2x2 radio set, which covers 2.4, 5 and 6 GHz.
- Two 5GbE ports that auto-sense are on each node.
- eero lists support for 200 or more devices per node, plus wireless speeds up to 3.9Gbps.
Spec by spec
Where they really differ
| Spec | TP-Link Deco BE67 3-pack | eero Pro 7 3-pack | In practice |
|---|---|---|---|
| Wi-Fi generation | 7 | 7 | Actual throughput isn't established by a generation label. |
| Radio bands | 2.4 GHz, 5 GHz, 6 GHz | 2.4 GHz, 5 GHz, 6 GHz | Whether an extra band helps comes down to client support and placement. |
| Units in selected bundle | 3 | 3 | Go by the exact package and not a family-wide headline. |
| Maximum WAN link | 10Gb | 5Gb | The connection has to be supported by the modem and the service. |
| Gateway sockets | 10Gb + 2.5Gb + 1Gb shared with WAN | 5Gb + 5Gb shared with WAN | A socket that serves WAN can't also act as a LAN connection. |
| Satellite sockets | 10Gb + 2.5Gb + 1Gb | 5Gb + 5Gb | One of these physical ports gets used up by the wired uplink. |
Trade-offs
What each pick costs you
With TP-Link Deco BE67 3-pack
- You buy premium HomeShield functions separately from the hardware.
With eero Pro 7 3-pack
- You keep paying for eero Plus to get advanced security and expanded parental controls.
Decision guide
How to decide
A faster incoming link is what BE67 takes
Its 10Gb port can serve as WAN, which leaves 2.5Gb and 1Gb for downstream devices. The incoming capacity may be shared across several connections, though no single wired client inherits the 10Gb headline.
Both sides stay balanced on Pro 7
A 5Gb modem connection and a 5Gb client are both supported by its two ports. If you need more wired branches, a compatible switch is required.
Look at the satellite end as well
When a BE67 satellite uses its 10Gb port for the uplink, a local client gets 2.5Gb. Pro 7 can put one 5Gb socket on each leg. Treat these as link ceilings. They are not measured transfer rates.
What this page can’t tell you
- Published specifications and the stated calculations are the basis for these conclusions. No hands-on performance test stands behind them.
By the numbers
What the data shows
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
How many fit
This guide keeps all 35 models in play. The pick rests on the facts and trade-offs on this page.
35 models fit, out of 35 checkedShow the facts and the math
How we countedNo needs are preselected here. Open the matcher and add the ones that apply to your home, room or setup.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| TP-Link Deco BE67 3-pack | None of these needs is a documented match |
| |
| eero Pro 7 3-pack | None of these needs is a documented match |
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
TP-Link Deco BE67 3-pack
WAN socket must be 10Gb
See price & reviews on Amazoneero Pro 7 3-pack
The downstream wired connection must be 5Gb
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money