The catch
TP-Link Deco X50-Outdoor 1-Pack
A 1 Gbps link rate is the cap on wired traffic.
Side by side
A Deco home, or a need for a spare outdoor Ethernet connection, points to X50-Outdoor. An eero home points to Outdoor 7, whose faster single port is fully taken up as soon as wired backhaul is used.
Before you buy
Deco has one spare port and eero has none once a wired uplink is installed.
Where this comes from
On Outdoor 7, 1 − 1 = 0. On X50-Outdoor, 2 − 1 = 1.
The catch
A 1 Gbps link rate is the cap on wired traffic.
The catch
Once the wired uplink is connected, there is no downstream Ethernet socket left.


We may earn a commission from qualifying Amazon purchases. How we make money
Patio coverage, cable power and a spare Ethernet device decide between Deco X50-Outdoor and eero Outdoor 7. Don't end up with the wrong mesh extension.
Which one fits
Keep to the Deco family to have a single managed mesh.
The compatible extension is Outdoor 7.
Outdoor 7 has no socket left after uplink, but the X50-Outdoor does.
A 2.5G link is accepted by Outdoor 7 as long as the upstream equipment supports it.
In practice
Deco has one spare port and eero has none once a wired uplink is installed.
On Outdoor 7, 1 − 1 = 0. On X50-Outdoor, 2 − 1 = 1.
There is no second socket on Outdoor 7 for a directly attached wired client.
The only 2.5G port it has handles PoE and the wired data uplink.
On Outdoor 7, the Wi-Fi 7 badge leaves the shared two-band set as it is.
Only 2.4 GHz and 5 GHz radios appear in both official specifications.
Plug in your setup
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
This listing comes with 1 node. Your plan needs 2, so you would have to buy extra compatible hardware.
This is an add-on unit for an existing compatible mesh network. It is not a full gateway kit for the layout below.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.

TP-Link, Deco X50-Outdoor
This is an outdoor add-on for a Deco home. With the uplink connected, its two Ethernet ports leave room for one wired device.

eero, Outdoor 7
This outdoor node is meant for an existing eero network. The listing includes the 30W power adapter, yet no Ethernet socket is free once a wired uplink is connected.
Spec by spec
| Spec | TP-Link Deco X50-Outdoor 1-Pack | eero Outdoor 7 with 30W PoE+ Adapter | In practice |
|---|---|---|---|
| Mesh compatibility | Deco | eero | Their mesh management is not made compatible just because they share a Wi-Fi standard. |
| Ethernet inventory | 2 × 1G | 1 × 2.5G | A spare socket comes from Deco, a faster single uplink from eero. |
| Wired device socket after uplink | 1 | 0 | In this layout, another Ethernet device can't be attached directly to Outdoor 7. |
| Wireless generation | Wi-Fi 6 | Wi-Fi 7 | 2.4 and 5 GHz are used by both, with no 6 GHz radio. |
| Enclosure rating | IP65 | IP66 | For either rating, follow the mounting and cable-sealing instructions. |
| Power options in scope | PoE or AC | PoE+, 30W adapter in selected bundle | Look at the whole power arrangement and not only the node price. |
Trade-offs
Decision guide
Keeping the outdoor unit in the same mesh family gives the cleanest installation. Go with another family and you end up with a separate managed network. It will not appear as one more node in the app you already use.
The X50-Outdoor port layout earns its keep at once when a nearby wired device is in the plan. A spare port still does not mean PoE power for that device.
What you can use depends on placement, exterior walls, mounting height and the path back indoors. Try the intended spot first, then make the cable route permanent.
By the numbers
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
Only 3 of the 35 models checked meet every need here: “Wi-Fi has to reach my patio or garden” and “I can run Ethernet between the mesh nodes”.
3 models fit, out of 35 checkedHow we countedThe count uses each product's current fit ratings for “Wi-Fi has to reach my patio or garden” and “I can run Ethernet between the mesh nodes”. A need with no documented match is not counted.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| TP-Link Deco X50-Outdoor 1-Pack |
|
|
|
| eero Outdoor 7 with 30W PoE+ Adapter |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Deco runs your indoor mesh.
See price & reviews on Amazon
eero runs your indoor mesh.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money