The catch
TP-Link Deco XE75 3-pack
Wired traffic maxes out at one gigabit because all three Ethernet ports on each node are gigabit.
Side by side
If a faster internet connection has to feed devices near the main node, XE75 Pro is the one to get. If gigabit service is enough, XE75 will do. Neither has the two multi-gig ports a fully multi-gig wired path would need.
Before you buy
The WAN link ceiling goes from 1 to 2.5 Gbps, yet the fastest remaining gateway LAN connection stays at 1 Gbps.
Where this comes from
The only 2.5G socket on Pro goes to the fastest WAN, and the remaining ports are 1G.
The catch
Wired traffic maxes out at one gigabit because all three Ethernet ports on each node are gigabit.
The catch
Once the only 2.5 Gbps port handles internet, wired backhaul is left with gigabit ports.


We may earn a commission from qualifying Amazon purchases. How we make money
The Deco XE75 Pro beats XE75 in some spots, yet gigabit ports can still hold back a wired room. Here is how the 6 GHz, WAN and backhaul paths compare.
Which one fits
A gigabit handoff doesn't need the faster Pro WAN socket.
The faster WAN link is accepted by Pro alone.
With its 2.5G port taken by WAN, Pro is left without a second fast gateway socket.
After backhaul, two Ethernet sockets remain on both.
In practice
The WAN link ceiling goes from 1 to 2.5 Gbps, yet the fastest remaining gateway LAN connection stays at 1 Gbps.
The only 2.5G socket on Pro goes to the fastest WAN, and the remaining ports are 1G.
In this layout, a fast PC next to the Pro satellite still has to cross a gigabit link at the main node.
1 Gbps before overhead = the minimum of 2.5G WAN, 1G gateway LAN and the satellite links, which sets the path ceiling.
An uplink and two room devices are supported by both.
Per satellite, 2 local connections = 3 sockets − 1 wired uplink.
Plug in your setup
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
The ports cover this 2-node wired layout with 0 gateway LAN ports to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
The ports cover this 2-node wired layout with 0 gateway LAN ports to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.

TP-Link, Deco XE75
6 GHz can serve either clients or mesh traffic on this AXE5400 tri-band Wi-Fi 6E mesh.

TP-Link, Deco XE75 Pro
A three-node Deco setup gets a faster internet socket and 6 GHz here. The second Ethernet link is still capped at a gigabit.
Spec by spec
| Spec | TP-Link Deco XE75 3-pack | TP-Link Deco XE75 Pro 3-Pack | In practice |
|---|---|---|---|
| Ethernet per node | 3 × 1 Gbps | 1 × 2.5 Gbps plus 2 × 1 Gbps | On Pro, one socket is upgraded and not all three. |
| WAN ceiling | 1 Gbps | 2.5 Gbps | A multi-gig internet connection can be accepted by Pro. |
| LAN after fastest WAN is used | 2 × 1 Gbps | 2 × 1 Gbps | A wired satellite still begins at a gigabit gateway port. |
| Radio generation | Wi-Fi 6E | Wi-Fi 6E | A 6 GHz radio comes with both. |
| Selected package | 3 nodes | 3 nodes | Both give you the same number of placements. |
| Satellite sockets after uplink | 2 | 2 | Neither offers a multi-gig end-to-end path, though both accommodate two wired room devices. |
Trade-offs
Decision guide
A better WAN can help traffic that the main node hands out to wireless devices. Treat it as no guarantee that any one Wi-Fi client receives 2.5 Gbps.
The router needs a second fast socket to give you a fully fast routed path. A 2.5G switch on a gigabit gateway LAN connection does nothing for that uplink, which stays at gigabit speed.
Listings for XE75 and XE75 Pro look alike. Before checkout, read the Ethernet specification and confirm exactly which model you selected.
By the numbers
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
Only 4 of the 35 models checked meet every need here: “I can't go without Wi-Fi 6E” and “I can run Ethernet between the mesh nodes”.
4 models fit, out of 35 checkedHow we countedThe count uses each product's current fit ratings for “I can't go without Wi-Fi 6E” and “I can run Ethernet between the mesh nodes”. A need with no documented match is not counted.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| TP-Link Deco XE75 3-pack |
|
| |
| TP-Link Deco XE75 Pro 3-Pack |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Your service is gigabit at most.
See price & reviews on Amazon
Your internet arrives over a faster handoff.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money