The catch
eero 6+ 3-pack
A multi-gig internet plan cannot pass through the gateway, because its two Ethernet ports are limited to one gigabit.
Side by side
If your internet tops out at one gigabit and you want the lowest sensible eero cost, go with eero 6+. If a 2.5Gbps internet path, wired backhaul or Wi-Fi 7 clients will come into play over the system's life, go with eero 7.
Before you buy
The catch
A multi-gig internet plan cannot pass through the gateway, because its two Ethernet ports are limited to one gigabit.
The catch
Wi-Fi 7 clients are limited to 2.4 and 5 GHz because the system has no 6 GHz radio.


We may earn a commission from qualifying Amazon purchases. How we make money
Dual-band eero three-packs sorted by gigabit versus multi-gig homes.
This one comes down to wireless standard and ethernet per node first, then to the limits of your own setup.
Day to day
Say the gateway sits next to a desktop and the other two eeros will run on wall Ethernet. Once the modem takes up a socket, neither kit can connect all three branches directly. Picking eero 7 doesn't take that small switch off the shopping list. Choose it for a planned multi-gig route, and then match the switch and desktop adapter to that route.
Two sockets are on each gateway. After the modem connection, one LAN connection is left, but this layout needs three. The switch has to go downstream of the gateway.
If an office is already wired through a gigabit switch, swapping only the mesh for eero 7 leaves the desktop path at gigabit. Stay with 6+ when that path does the job and nothing else changes. Go for 7 if you will also remove the slower intermediary, especially for local transfers to a compatible faster NAS. It is a wiring decision and not a promised Wi-Fi speed increase.
Its slowest Ethernet segment sets the limit for the whole route. Connect a 2.5GbE port through a 1GbE switch and the route still contains a 1GbE segment.
Which one fits
eero 6+ 3-pack lists “Two 1Gbps ports” for ethernet per node, while eero 7 3-pack lists “Two 2.5Gbps ports”. For ethernet per node, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup.
More than one gigabit won't get stuck at the gateway, thanks to its WAN and backhaul ports.
Wi-Fi 7 features like multi-link operation are supported, with compatible clients and firmware.
Two or three nodes in a compact layout give you enough freedom in placement, with no need to pay for oversized radio hardware.
eero 6+ 3-pack lists “Dual-band Wi-Fi 6” for wireless standard, while eero 7 3-pack lists “Dual-band Wi-Fi 7”. For wireless standard, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup.
Documented family controls are included, and any paid tiers are identified in the tradeoffs.
Plug in your setup
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
The gateway does not have enough ports at your chosen speeds for your internet line, 1 direct node link and 1 wired device. A suitable external switch could change that.
The gateway does not have enough ports at your chosen speeds for your internet line, 1 direct node link and 1 wired device. A suitable external switch could change that.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.

eero, R010311
This dual-band Wi-Fi 6 mesh offers gigabit Ethernet and 160 MHz channels, and it doubles as an Alexa smart-home hub.

eero, P013111
Every node on this dual-band BE5000 mesh has two 2.5Gbps ports, and the system supports Wi-Fi 7 MLO.
Spec by spec
| Spec | eero 6+ 3-pack | eero 7 3-pack | In practice |
|---|---|---|---|
| Wireless standard | Dual-band Wi-Fi 6 | Dual-band Wi-Fi 7 | For wireless standard, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup. |
| Ethernet per node | Two 1Gbps ports | Two 2.5Gbps ports | For ethernet per node, this affects what you can connect and how data can move. A higher rating on the label does not guarantee the same real-world result in every setup. |
| 6 GHz | No | No | Both models show the same result for “6 GHz”, so this row won't decide between them. |
Trade-offs
By the numbers
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| eero 6+ 3-pack |
|
|
|
| eero 7 3-pack |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Your internet plan is no faster than one gigabit
See price & reviews on Amazon
Your plan runs faster than one gigabit
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money