The catch
eero Pro 7 3-pack
Without 6 GHz clients, the three-pack is a lot more expensive than dual-band eero 7.
Side by side
eero Pro 7 vs TP-Link Deco BE63: eero gets 5Gb through, and Deco leaves three device sockets after the internet cable
Quick verdict
A 5Gb wired path points to eero Pro 7. A desk with more wired devices suits Deco BE63, which has three spare 2.5Gb sockets once the internet connection is made.
Before you buy
Why, and what it costs you
Tally the gateway sockets that are free
Each directly wired satellite or device uses one more. Once the internet cable is in, Deco BE63 leaves 3 gateway LAN sockets and eero Pro 7 leaves 1.
Where this comes from
Free ports on an auto-sensing gateway = physical ports minus one WAN allocation. Models with a dedicated WAN use their documented LAN inventory. Inputs: 5Gb + 5Gb and 2.5Gb + 2.5Gb + 2.5Gb + 2.5Gb.
The catch
TP-Link Deco BE63 3-pack
Very fast NAS or internet links are capped at 2.5Gbps per port, since there is no 10Gbps Ethernet.
eero Pro 7 3-pack
- Why pick it
- You need 5Gb from internet to device
- You favor eero's system
- The catch
- Without 6 GHz clients, the three-pack is a lot more expensive than dual-band eero 7.
TP-Link Deco BE63 3-pack
- Why pick it
- Several wired devices will plug into one node
- A wired layout of three nodes must work without a switch
- The catch
- Very fast NAS or internet links are capped at 2.5Gbps per port, since there is no 10Gbps Ethernet.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
A 5Gb wired path points to eero Pro 7. A desk with more wired devices suits Deco BE63, which has three spare 2.5Gb sockets once the internet connection is made.
Individual sockets are faster on the eero
Which one fits
Pick the situations that sound like you
You need 5Gb from internet to device
WAN and one wired connection can both run at 5Gb on its two 5Gb ports. A fast workstation benefits, as long as the modem, adapter and cables support that speed too.
- eero Pro 7 3-pack
- Better fit
- TP-Link Deco BE63 3-pack
- Not suitable
After WAN, wire two satellites and a desktop directly
After WAN takes one of the four 2.5Gb ports, three remain. Two satellite links and a desktop can connect straight to the gateway at 2.5Gb, no switch needed.
- eero Pro 7 3-pack
- Not suitable
- TP-Link Deco BE63 3-pack
- Better fit
Look at the whole setup
After WAN, a Pro 7 gateway has one free port. A star layout with two wired satellites needs a switch, and extra radio speed does not add physical sockets.
- eero Pro 7 3-pack
- Depends
- TP-Link Deco BE63 3-pack
- Depends
Link WAN, two satellites and one desktop with no switch in between
For that same four-connection plan, Pro 7 needs a switch, while BE63 can connect WAN, two satellites and a desktop directly.
- eero Pro 7 3-pack
- Not suitable
- TP-Link Deco BE63 3-pack
- Better fit
In practice
Differences you will notice
Tally the gateway sockets that are free
Each directly wired satellite or device uses one more. Once the internet cable is in, Deco BE63 leaves 3 gateway LAN sockets and eero Pro 7 leaves 1.
How we worked this out
Free ports on an auto-sensing gateway = physical ports minus one WAN allocation. Models with a dedicated WAN use their documented LAN inventory. Inputs: 5Gb + 5Gb and 2.5Gb + 2.5Gb + 2.5Gb + 2.5Gb.
Follow the cable's route through the satellite
Once the fastest documented uplink is allocated, Deco BE63 retains a client socket up to 2.5Gb and eero Pro 7 up to 5Gb. This downstream limit cannot be removed by a faster WAN.
How we worked this out
Set aside the documented satellite uplink, or the fastest auto-sensing socket, and then take the maximum speed among the remaining ports. Satellite inventories: 5Gb + 5Gb and 2.5Gb + 2.5Gb + 2.5Gb + 2.5Gb. Before overhead, link rates are ceilings.
The four-port Deco suits three-node wiring better
For that same four-connection plan, Pro 7 needs a switch, while BE63 can connect WAN, two satellites and a desktop directly.
How we worked this out
WAN + two satellite links + one desktop = four distinct sockets, while BE63 has four auto-sensing ports and Pro 7 has two.
Plug in your setup
Can this mesh kit handle your wired layout?
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
eero Pro 7 3-pack
Fails these checksThe gateway does not have enough ports at your chosen speeds for your internet line, 1 direct node link and 1 wired device. A suitable external switch could change that.
TP-Link Deco BE63 3-pack
Passes these checksThe ports cover this 2-node wired layout with 1 gateway LAN port to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.
Option A
eero, M013111
eero Pro 7 3-pack
Each node of this tri-band BE10800 mesh offers 6 GHz and two 5Gbps Ethernet ports.
- Best for
- Five-gigabit wiring and 6 GHz on a busy eero network
Facts we checked
- MLO is supported across the tri-band 2x2 radio set, which covers 2.4, 5 and 6 GHz.
- Two 5GbE ports that auto-sense are on each node.
- eero lists support for 200 or more devices per node, plus wireless speeds up to 3.9Gbps.
Option B
TP-Link, Deco BE63
Deco BE63 3-pack
Every node in this tri-band BE10000 mesh includes 6 GHz, four 2.5Gbps ports and USB.
- Best for
- Multi-gig Wi-Fi 7 for most homes that are ready
Facts we checked
- The BE10000 is a tri-band design with 2.4, 5 and 6 GHz radios and MLO.
- A USB 3.0 port and four 2.5Gbps Ethernet ports are on every node.
- Backhaul can be wireless, wired or combined on TP-Link's Deco Wi-Fi 7 platform.
Spec by spec
Where they really differ
| Spec | eero Pro 7 3-pack | TP-Link Deco BE63 3-pack | In practice |
|---|---|---|---|
| Wi-Fi generation | 7 | 7 | Actual throughput isn't established by a generation label. |
| Radio bands | 2.4 GHz, 5 GHz, 6 GHz | 2.4 GHz, 5 GHz, 6 GHz | Whether an extra band helps comes down to client support and placement. |
| Units in selected bundle | 3 | 3 | Go by the exact package and not a family-wide headline. |
| Maximum WAN link | 5Gb | 2.5Gb | The connection has to be supported by the modem and the service. |
| Gateway sockets | 5Gb + 5Gb shared with WAN | 2.5Gb + 2.5Gb + 2.5Gb + 2.5Gb shared with WAN | A socket that serves WAN can't also act as a LAN connection. |
| Satellite sockets | 5Gb + 5Gb | 2.5Gb + 2.5Gb + 2.5Gb + 2.5Gb | One of these physical ports gets used up by the wired uplink. |
Trade-offs
What each pick costs you
With eero Pro 7 3-pack
- You keep paying for eero Plus to get advanced security and expanded parental controls.
With TP-Link Deco BE63 3-pack
- Beyond the core controls, HomeShield premium features cost extra on a recurring basis.
Decision guide
How to decide
Individual sockets are faster on the eero
WAN and one wired connection can both run at 5Gb on its two 5Gb ports. A fast workstation benefits, as long as the modem, adapter and cables support that speed too.
More places to plug things in are on the Deco
After WAN takes one of the four 2.5Gb ports, three remain. Two satellite links and a desktop can connect straight to the gateway at 2.5Gb, no switch needed.
Sketch the connections before you buy
After WAN, a Pro 7 gateway has one free port. A star layout with two wired satellites needs a switch, and extra radio speed does not add physical sockets.
What this page can’t tell you
- Published specifications and the stated calculations are the basis for these conclusions. No hands-on performance test stands behind them.
By the numbers
What the data shows
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
How many fit
This guide keeps all 35 models in play. The pick rests on the facts and trade-offs on this page.
35 models fit, out of 35 checkedShow the facts and the math
How we countedNo needs are preselected here. Open the matcher and add the ones that apply to your home, room or setup.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| eero Pro 7 3-pack | None of these needs is a documented match |
| |
| TP-Link Deco BE63 3-pack | None of these needs is a documented match |
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
eero Pro 7 3-pack
You need 5Gb from internet to device
See price & reviews on AmazonTP-Link Deco BE63 3-pack
Several wired devices will plug into one node
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money