The catch
NETGEAR Orbi 770 3-pack
Orbi 870 and 970 have a higher wired ceiling than this model's 2.5Gbps.
Side by side
Deco BE63 is the choice when every wired room needs several Ethernet devices. Orbi 770 has room for one wired device beside each wired satellite. From the gateway, either can connect two satellite branches directly.
Before you buy
An Orbi 770 satellite has one free socket when wired, and a wired BE63 satellite has three.
Where this comes from
On Orbi 770, 2 − 1 = 1. On BE63, 4 − 1 = 3.
The catch
Orbi 870 and 970 have a higher wired ceiling than this model's 2.5Gbps.
The catch
Very fast NAS or internet links are capped at 2.5Gbps per port, since there is no 10Gbps Ethernet.


We may earn a commission from qualifying Amazon purchases. How we make money
For wired TVs, consoles and NAS devices, Orbi 770 and Deco BE63 have similar gateways but different satellite ports.
Which one fits
Deco leaves three ports and Orbi leaves one.
The two-cable uplink-plus-PC layout is satisfied by both.
The four sockets required, WAN included, are on both gateways.
Distinct router and satellite roles are not a feature of Deco, which uses interchangeable hardware.
In practice
An Orbi 770 satellite has one free socket when wired, and a wired BE63 satellite has three.
On Orbi 770, 2 − 1 = 1. On BE63, 4 − 1 = 3.
WAN, two satellite links and one local device fit on both with no switch.
1 local connection = 4 gateway sockets − 1 WAN − 2 branches.
The difference shows up in the rooms, away from the gateway.
In the BE63 kit, 2 satellites × (4 − 2 ports) = 4 additional physical sockets.
Plug in your setup
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
The ports cover this 2-node wired layout with 1 gateway LAN port to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
The ports cover this 2-node wired layout with 1 gateway LAN port to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.

NETGEAR, RBE773
An upgraded backhaul link, 6 GHz and 2.5Gbps Ethernet round out this tri-band Wi-Fi 7 mesh.

TP-Link, Deco BE63
Every node in this tri-band BE10000 mesh includes 6 GHz, four 2.5Gbps ports and USB.
Spec by spec
| Spec | NETGEAR Orbi 770 3-pack | TP-Link Deco BE63 3-pack | In practice |
|---|---|---|---|
| Gateway ports | 1 × 2.5G WAN plus 3 × 2.5G LAN | 4 × 2.5G auto ports | Three LAN sockets remain on both after WAN. |
| Satellite ports | 2 × 2.5G | 4 × 2.5G | Two additional room connections are on Deco. |
| After satellite uplink | 1 local port | 3 local ports | Whether a room switch is needed comes down to this. |
| After WAN and two satellite branches | 1 gateway port free | 1 gateway port free | Both have the same gateway star budget. |
| Radio set | Tri-band Wi-Fi 7 | Tri-band Wi-Fi 7 | 2.4, 5 and 6 GHz are included in both. |
| Hardware roles | Distinct router and satellites | Interchangeable nodes | Swapping the main node is simpler with Deco. |
Trade-offs
Decision guide
Both main units look well equipped. The difference you can use shows up only after a satellite goes upstairs and its backhaul cable is plugged in, since Deco still has room left for several local devices.
When a TV and console competing for the node is the real problem, the direct answer is a unit with plenty of ports or a small switch. A higher aggregate Wi-Fi number adds no socket.
Next to the gateway, a NAS fits the example on both systems. A NAS that shares a room with several devices may connect more easily beside a BE63 satellite. Before assuming any multi-gig transfer benefit, check the speed of every endpoint.
By the numbers
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
Only 11 of the 35 models checked meet every need here: “I plan to plug a TV and console in next to a wired node”, “I can run Ethernet between the mesh nodes”, and “My wired devices run at 2.5Gbps or 5Gbps”.
11 models fit, out of 35 checkedHow we countedThe count uses each product's current fit ratings for “I plan to plug a TV and console in next to a wired node”, “I can run Ethernet between the mesh nodes”, and “My wired devices run at 2.5Gbps or 5Gbps”. A need with no documented match is not counted.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| NETGEAR Orbi 770 3-pack |
|
| |
| TP-Link Deco BE63 3-pack |
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

A single wired device in each satellite room does the job.
See price & reviews on Amazon
Each wired satellite hosts a TV and a console.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money