The catch
UGREEN NASync DXP6800 Pro
Compatible drives bought separately are still needed for its extra bays.
Side by side
UGREEN DXP6800 Pro vs DXP4800 Plus Compared: 6800 gains HDD bays and a second 10GbE port, yet M.2 slots stay the same
Quick verdict
Six internal SATA drives, two native 10GbE ports or a supported PCIe card in the plan point to the DXP6800 Pro. If four drives and one 10GbE connection cover it, the DXP4800 Plus will do. Two NVMe sockets and a 64 GB supported memory ceiling come on both, so those requirements alone do not call for the larger chassis.
Before you buy
Why, and what it costs you
The six-bay layout is what a 40 TB archive with dual parity needs
In RAID 6, six equal 12 TB drives give 48 TB before overhead and four give 24 TB.
Where this comes from
Illustratively, the formula is (drive count minus 2) times 12 TB. Compatible drives and a separate backup are still necessary.
The catch
UGREEN NASync DXP4800 Plus
Four drives is where the internal SATA plan ends.
UGREEN NASync DXP6800 Pro
- Why pick it
- Fit six SATA drives into one chassis
- Run two separate 10GbE paths with no NAS card
- The catch
- Compatible drives bought separately are still needed for its extra bays.
UGREEN NASync DXP4800 Plus
- Why pick it
- Work with up to four SATA drives and one native 10GbE port
- Live with the same two-NVMe and 64 GB memory limits
- The catch
- Four drives is where the internal SATA plan ends.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
A six-drive RAID plan, two native 10GbE links and a supported expansion card, compared across DXP6800 Pro and DXP4800 Plus.
Six internal SATA drives, two native 10GbE ports or a supported PCIe card in the plan point to the DXP6800 Pro. If four drives and one 10GbE connection cover it, the DXP4800 Plus will do. Two NVMe sockets and a 64 GB supported memory ceiling come on both, so those requirements alone do not call for the larger chassis.
Which one fits
Pick the situations that sound like you
Build a RAID 6 archive from six equal SATA drives
Four internal bays are on DXP4800 Plus.
- UGREEN NASync DXP6800 Pro
- Better fit
- UGREEN NASync DXP4800 Plus
- Not suitable
Hook up two separate native 10GbE paths
One 10GbE socket is on DXP4800 Plus.
- UGREEN NASync DXP6800 Pro
- Better fit
- UGREEN NASync DXP4800 Plus
- Not suitable
Fit two onboard NVMe drives
Two M.2 positions come with each.
- UGREEN NASync DXP6800 Pro
- Good
- UGREEN NASync DXP4800 Plus
- Good
Run 32 GB of supported memory
An upgrade from the supplied 8 GB is needed on both.
- UGREEN NASync DXP6800 Pro
- Good
- UGREEN NASync DXP4800 Plus
- Good
In practice
Differences you will notice
The six-bay layout is what a 40 TB archive with dual parity needs
In RAID 6, six equal 12 TB drives give 48 TB before overhead and four give 24 TB.
How we worked this out
Illustratively, the formula is (drive count minus 2) times 12 TB. Compatible drives and a separate backup are still necessary.
Two fast network paths are not the same as one faster client
Two native 10GbE ports come with DXP6800 Pro, and one with DXP4800 Plus.
How we worked this out
Two ports do not automatically combine for one transfer. The second port on DXP4800 Plus is rated at 2.5GbE.
A larger box does not enlarge every resource
Two NVMe sockets and the same stated 64 GB RAM ceiling are common to both models. DXP6800 Pro alone adds the card slot.
How we worked this out
Stepping up means six SATA bays against four, plus different connection hardware. The documented RAM limit stays where it is.
Option A
UGREEN, DXP6800 Pro
UGREEN NASync DXP6800 Pro
It has two native 10GbE ports, six SATA bays, two NVMe sockets and a supported memory ceiling of 64 GB.
- Best for
- Fit six SATA drives into one chassis
Facts we checked
- SATA bays inside: 6
- Built-in Ethernet: Two 10GbE ports
- PCIe slot for general use: One x4 slot
- NVMe sockets onboard: 2
Option B
UGREEN, DXP4800 Plus
UGREEN NASync DXP4800 Plus
A 4-bay chassis whose fastest documented network path is 10 Gbps.
- Best for
- Work with up to four SATA drives and one native 10GbE port
Facts we checked
- SATA bays inside: 4
- Built-in Ethernet: One 10GbE port plus one 2.5GbE port
- PCIe slot for general use: None listed
- NVMe sockets onboard: 2
Spec by spec
Where they really differ
| Spec | UGREEN NASync DXP6800 Pro | UGREEN NASync DXP4800 Plus | In practice |
|---|---|---|---|
| Internal SATA bays | 6 | 4 | Choose the chassis only after counting the drives you intend to use. |
| Native Ethernet | Two 10GbE ports | One 10GbE and one 2.5GbE port | The physical ceiling of a second network connection may be different. |
| General-purpose PCIe slot | One x4 slot | None listed | A plan with an expansion card needs the matching physical slot and software support. |
| Onboard NVMe sockets | 2 | 2 | No NVMe sockets come with the larger HDD chassis. |
| Installed and maximum RAM | 8 GB, expandable to 64 GB | 8 GB, expandable to 64 GB | On either side, a supported 32 GB plan calls for a memory upgrade. |
| RAID 6 support | Supported with sufficient drives | Supported with sufficient drives | Parity takes up two drives worth of capacity. |
Trade-offs
What each pick costs you
With UGREEN NASync DXP6800 Pro
- Card or application compatibility is not established by a PCIe slot alone.
With UGREEN NASync DXP4800 Plus
- The second native Ethernet port runs at 2.5GbE.
Change of plan
When the answer changes
I want six internal drives, or alternatively two native 10GbE ports
Go with UGREEN NASync DXP6800 Pro. The additional hardware comes with DXP6800 Pro.
The plan is covered by four drives and one 10GbE link
Go with UGREEN NASync DXP4800 Plus. Those requirements are met by DXP4800 Plus.
I require four onboard NVMe sockets
Neither model fits. Two sockets come with each model.
Decision guide
How to decide
The six-bay layout is what a 40 TB archive with dual parity needs
A 40 TB archive that must survive two drive failures is out of reach for the four-bay chassis with the assumed 12 TB drives. The six-bay example has 48 TB before formatting, system use and spare operating space. This is a capacity screening calculation, and it says nothing about rebuild duration or whether an existing pool can be expanded in place.
Two fast network paths are not the same as one faster client
Both fast ports on the DXP6800 Pro get used when you run a direct 10GbE workstation connection plus a separate 10GbE switch connection. The smaller model cannot supply that same native port arrangement. Confirm routing, addresses, adapters and software configuration. If the household uses a single 10GbE link, both chassis already supply the required socket.
A larger box does not enlarge every resource
Installing two NVMe drives or 32 GB of compatible RAM is no reason by itself to move to the six-bay model, since either model lists those physical capacities. Step up when the additional SATA positions, the second 10GbE port or a specifically supported PCIe card solve a real requirement. Check the card and UGOS support together before treating an empty slot as a working feature.
What this page can’t tell you
- Capacity examples with equal drives use decimal TB before overhead. Matched transfer, Plex, reliability, acoustic and rebuild tests were not performed. RAID is not a backup.
By the numbers
What the data shows
What we found across the NAS devices we compare, plus the checked facts behind each finding.
Show the facts and the math
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| UGREEN NASync DXP6800 Pro |
|
|
|
| UGREEN NASync DXP4800 Plus |
|
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
UGREEN NASync DXP6800 Pro
Fit six SATA drives into one chassis
See price & reviews on AmazonUGREEN NASync DXP4800 Plus
Work with up to four SATA drives and one native 10GbE port
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money