Side by side

EcoFlow DELTA 3 Plus vs Anker SOLIX C1000 Gen 2: Neither starts with more reserve, and Anker runs higher steady loads

Quick verdict

If battery expansion or two solar inputs matter to you, the DELTA 3 Plus is the one. If you carry the station often, or need a steady AC load between 1800W and 2000W, take the C1000 Gen 2. Each stores 1024Wh, so the Anker’s larger inverter adds no reserve and EcoFlow’s Plus name doesn’t signal a larger base battery.

Before you buy

Why, and what it costs you

The extra 200W can flip a once-clear appliance decision

Anker has 100W of rated total headroom at a steady 1900W, while EcoFlow is 100W over its rating.

Where this comes from

1900 − 1800 = 100W and 2000 − 1900 = 100W. Startup surge and individual outlet constraints are left out.

The catch

EcoFlow DELTA 3 Plus

Despite a similar 1kWh battery, its 1,800W continuous inverter is lower than the C1000 Gen 2’s. X-Boost leaves that normal output limit unchanged.

The catch

Anker SOLIX C1000 Gen 2

Gen 2 has no built-in light and, unlike the first-generation C1000, cannot take an expansion battery.

EcoFlow DELTA 3 Plus

EcoFlow DELTA 3 Plus

Why pick it
  • Adding a compatible expansion battery later is in your plans.
  • Two solar inputs with up to 1000W combined, or two 140W USB-C ports, are what you want.
The catch
Despite a similar 1kWh battery, its 1,800W continuous inverter is lower than the C1000 Gen 2’s. X-Boost leaves that normal output limit unchanged.
See price & reviews on Amazon
Anker SOLIX C1000 Gen 2

Anker SOLIX C1000 Gen 2

Why pick it
  • Continuous AC headroom beyond 1800W is a requirement.
  • Saving 2.7 lb appeals to you, and fixed capacity is fine.
The catch
Gen 2 has no built-in light and, unlike the first-generation C1000, cannot take an expansion battery.
See price & reviews on Amazon

We may earn a commission from qualifying Amazon purchases. How we make money

Comparison updated , Product data updated , Amazon.com / United States

What this page compares

EcoFlow DELTA 3 Plus and Anker C1000 Gen 2 compared on expansion, two-input solar charging, carry weight and continuous appliance limits.

Anker favors carrying less and running a slightly larger steady load, whereas EcoFlow favors a growing solar setup.

Which one fits

Pick the situations that sound like you

  • My combined steady AC load comes to 1900W

    Anker alone is rated above that steady total.

    EcoFlow DELTA 3 Plus
    Not suitable
    Anker SOLIX C1000 Gen 2
    Better fit
  • I want room to add battery reserve later

    Compatible expansion batteries are supported by EcoFlow.

    EcoFlow DELTA 3 Plus
    Better fit
    Anker SOLIX C1000 Gen 2
    Not suitable
  • My solar panels are in two groups connected separately

    Two solar input channels are on DELTA 3 Plus.

    EcoFlow DELTA 3 Plus
    Better fit
    Anker SOLIX C1000 Gen 2
    Caution
  • I bring the station on short weekend trips

    Anker weighs about 2.7 lb less.

    EcoFlow DELTA 3 Plus
    Good
    Anker SOLIX C1000 Gen 2
    Better fit

In practice

Differences you will notice

The extra 200W can flip a once-clear appliance decision

Anker has 100W of rated total headroom at a steady 1900W, while EcoFlow is 100W over its rating.

How we worked this out

1900 − 1800 = 100W and 2000 − 1900 = 100W. Startup surge and individual outlet constraints are left out.

Total solar acceptance on EcoFlow is two thirds higher

Against Anker’s 600W ceiling, its 1000W combined ceiling is about 66.7% higher.

How we worked this out

(1000 − 600) ÷ 600 × 100 = 66.7%. To reach the combined maximum, EcoFlow needs input on both 500W channels.

Anker weighs nearly 10% less and gives up no nominal reserve

At 24.9 lb, it weighs about 9.8% less than the DELTA 3 Plus’s 27.6 lb.

How we worked this out

(27.6 − 24.9) ÷ 27.6 × 100 = 9.8%. Nominal base capacity stays at 1024Wh on both.

Option A
EcoFlow DELTA 3 Plus

EcoFlow, DELTA 3 Plus

DELTA 3 Plus

This 1,024Wh station cares more about quick solar recovery and high-power USB-C than about headline battery size. Its two 500W solar inputs can each take a separate panel string.

Best for
Backup built around laptops, plus daily solar

Facts we checked

  • A 1,024Wh LFP battery paired with 1,800W rated AC output
  • Two 140W USB-C ports and sub-10ms transfer, at about 27.6 lb
  • Supported expansion to roughly 5kWh, and two 500W solar inputs with 11–60V windows
Option B
Anker SOLIX C1000 Gen 2

Anker SOLIX, C1000 Gen 2

C1000 Gen 2

This 24.9-pound, 1,024Wh station has a 2,000W inverter, 140W USB-C and a 49-minute fast-charge mode that you switch on in the app.

Best for
As much usable output as a carryable 1kWh box allows

Facts we checked

  • 2,000W rated AC output and 3,000W peak, with 1,024Wh LFP capacity
  • A 140W USB-C port, at about 24.9 lb
  • In UltraFast mode, a 49-minute advertised full AC recharge, plus 10ms transfer and 600W solar input

Spec by spec

Where they really differ

Where EcoFlow DELTA 3 Plus and Anker SOLIX C1000 Gen 2 differ
SpecEcoFlow DELTA 3 PlusAnker SOLIX C1000 Gen 2In practice
Battery capacity1024Wh1024WhBoth begin with the same nominal reserve.
Continuous AC output1800W2000WAnker permits an additional 200W of steady combined demand.
Expansion battery supportSupported with compatible EcoFlow batteriesNo expansion battery supportA route to longer reserve exists on EcoFlow.
Maximum solar input1000W across two 500W inputs600W through one inputA second independently controlled feed and more solar acceptance come with EcoFlow.
Listed weightAbout 27.6 lb24.9 lbAnker trims about 2.7 lb.
High-power USB-CTwo up to 140WOne up to 140WAn additional high-power USB-C connection is on EcoFlow.

Trade-offs

What each pick costs you

With EcoFlow DELTA 3 Plus

  • IP65 applies to the battery pack, so it isn’t a license to run the whole station in the rain. Expansion batteries and alternator hardware are sold separately.

With Anker SOLIX C1000 Gen 2

  • To use the 49-minute mode you have to turn it on in the app, and it makes charging louder and draws more power.

Decision guide

How to decide

Let growth plans point you to EcoFlow and today’s load point you to Anker.

01

The 1900W load test is simple to read

A steady combined AC demand of 1900W is over the DELTA 3 Plus’s 1800W rating and under the C1000 Gen 2’s 2000W rating, so the Anker is the relevant choice for that job. Also check individual outlet ratings and startup demand. EcoFlow’s X-Boost mode doesn’t count as a substitute for the rated continuous supply.

02

EcoFlow’s advantage scales with the charging plan

The DELTA 3 Plus offers two solar inputs and compatible battery expansion, which together make sense for a system that will need more daily reserve and more time off-grid. The Anker stays at 1024Wh. If you always return home to recharge, you may never need those EcoFlow features and can put the lighter station first.

03

Matching capacity keeps the runtime question honest

Each battery holds 1024Wh. Absent comparable discharge testing, nominal specifications can’t hand either brand a runtime win. What separates them is the appliances they can support, the connections they offer and whether more battery can be added. Begin with those concrete needs, and then compare the current offers for the exact models.

Check these before you buy

  • Confirm which exact model you have, since Anker’s original C1000 supports expansion and the C1000 Gen 2 does not.
  • Hold each panel string to its input’s voltage and current limits.
  • Before you build a purchase around a 1900W example, check both the sustained load and the startup requirements.

What this page can’t tell you

  • A solar ceiling guarantees neither constant input nor a recharge time.
  • No ranking for measured efficiency or battery longevity is claimed here.

By the numbers

What the data shows

What we found across the portable power stations we compare, plus the checked facts behind each finding.

How many fit

Only 15 of the 50 models checked meet every need here: “Solar will be a real part of how I recharge”, “I might expand battery capacity later”, and “I need power out at a job site”.

15 models fit, out of 50 checked

The gap in numbers

Anker SOLIX C1000 Gen 2 lists 2,000 W for continuous AC output rating, 11% more than the 1,800 W on EcoFlow DELTA 3 Plus.

EcoFlow DELTA 3 Plus
1,800 W
Anker SOLIX C1000 Gen 2
2,000 W
Models with this figure
47 of 50
Show the facts and the math
Models in the comparison
50 models
Sources
4 covering these models
Product data updated

How we countedThe count uses each product's current fit ratings for “Solar will be a real part of how I recharge”, “I might expand battery capacity later”, and “I need power out at a job site”. A need with no documented match is not counted.

How we calculatedFigures are the continuous output rating. Surge numbers and boost modes that lower voltage do not count. For context, 47 of 50 models publish comparable figures.

The facts and sources behind each product in this recommendation
ProductNeeds it meetsFacts we checkedSources
EcoFlow DELTA 3 Plus
  • Faster solar
  • Expandable
  • A 1,024Wh LFP battery paired with 1,800W rated AC output
  • Two 140W USB-C ports and sub-10ms transfer, at about 27.6 lb
  • Supported expansion to roughly 5kWh, and two 500W solar inputs with 11–60V windows
Anker SOLIX C1000 Gen 2
  • Power tools
  • 2,000W rated AC output and 3,000W peak, with 1,024Wh LFP capacity
  • A 140W USB-C port, at about 24.9 lb
  • In UltraFast mode, a 49-minute advertised full AC recharge, plus 10ms transfer and 600W solar input

Ready to buy

See today’s price and what owners say

Open either model on Amazon for the current price, customer reviews and delivery options.

Each link opens in a new tab.

We may earn a commission from qualifying Amazon purchases. How we make money