The catch
PECRON E3800LFP
The Amazon headline says 120V/240V, but one E3800LFP supplies 120V. For 240V you need two units and the matching box.
Side by side
Larger supported AC loads and expansion point to the E3800LFP. If 2400W already covers the plan, the Elite 300 is easier to carry.
Before you buy
On a steady 300W load, the model puts PECRON E3800LFP at about 10.2 hours and BLUETTI Elite 300 at 8 hours.
Where this comes from
Hours = nominal Wh × 0.8 / 300W, with 3840Wh and 3014.4Wh as inputs. The 80% factor is a planning allowance shared by both for unusable energy and conversion losses. It is not a measured efficiency. Idle draw, temperature and the real load all change runtime.
The catch
The Amazon headline says 120V/240V, but one E3800LFP supplies 120V. For 240V you need two units and the matching box.
The catch
The 2400W total AC limit covers the RV outlet too.


We may earn a commission from qualifying Amazon purchases. How we make money
The E3800LFP is the choice for larger supported AC loads and expansion. When 2400W already covers your plan, the Elite 300 is the more manageable carry.
The inverter grows more than the energy does
Which one fits
Output rises from 2,400W to 4,200W with the PECRON, and capacity grows from 3,014.4 to 3,840Wh. What you are buying is mainly the ability to handle larger loads.
The E3800LFP weighs 87.3 pounds, versus 57.98. Work out who will load and unload it before you treat them as equally portable.
With the common planning assumptions, PECRON E3800LFP comes to 10.2 hours and BLUETTI Elite 300 to 8. Measure the real wattage before you settle on the overnight reserve you require.
PECRON E3800LFP can take up to 3000W of input and BLUETTI Elite 300 up to 1200W. Check your actual panel strings against voltage and current limits as well as this total.
In practice
On a steady 300W load, the model puts PECRON E3800LFP at about 10.2 hours and BLUETTI Elite 300 at 8 hours.
Hours = nominal Wh × 0.8 / 300W, with 3840Wh and 3014.4Wh as inputs. The 80% factor is a planning allowance shared by both for unusable energy and conversion losses. It is not a measured efficiency. Idle draw, temperature and the real load all change runtime.
BLUETTI Elite 300 stores 52 nominal watt-hours per pound. PECRON E3800LFP stores about 44.
The inputs are nominal energy over published weight, 3840 / 87.3 and 3014.4 / 57.98. They compare stored energy per lifted weight. No efficiency or handle-comfort measurement is involved.
Against Elite 300, E3800LFP has 75% more continuous output but about 27% more nominal capacity.
(3840 / 3014.4 - 1) × 100 = 27.4%, and 4200 / 2400 - 1 = 0.75.

PECRON, E3800LFP
A bigger battery and inverter built for demanding 120V backup loads. It fits best with a sizable solar installation or planned battery expansion. It is a poor fit as a box you lift in and out of the car every day.

BLUETTI, Elite 300
This box stores a lot of energy and still fits in a vehicle compartment. A 30A DC output together with an RV socket makes it especially useful on trips that call for longer runtime rather than a bigger inverter.
Spec by spec
| Spec | PECRON E3800LFP | BLUETTI Elite 300 | In practice |
|---|---|---|---|
| Nominal battery energy | 3840 Wh | 3014.4 Wh | The starting runtime budget comes from stored energy. |
| Continuous AC output | 4200 W | 2400 W | Load screening uses this sustained rating, which is separate from surge and boost modes. |
| Lifting weight | 87.3 lb | 57.98 lb | Flat ground is where wheels help. A trunk, step or shelf still takes a lift. |
| Maximum solar input | 3000 W | 1200 W | Panel voltage, current and per-port limits have to fit as well. |
| Dedicated battery expansion | Supported with compatible equipment | Fixed base capacity | Integrated battery expansion is not the same as charging from an external source. |
Trade-offs
Decision guide
Pick the E3800LFP for larger supported AC loads and expansion. Pick the Elite 300 as the more manageable carry when 2400W already covers the plan.
Output rises from 2,400W to 4,200W with the PECRON, and capacity grows from 3,014.4 to 3,840Wh. What you are buying is mainly the ability to handle larger loads.
The E3800LFP weighs 87.3 pounds, versus 57.98. Work out who will load and unload it before you treat them as equally portable.
To use the PECRON’s 3,000W total you need a compatible two-input panel plan. The Elite 300 has a 1,200W ceiling and a smaller fixed reserve to refill.
By the numbers
What we found across the portable power stations we compare, plus the checked facts behind each finding.
Only 6 of the 50 models checked meet every need here: “I need power at campsites and on weekends away”, “I want backup power for the essentials at home”, and “Solar will be a real part of how I recharge”.
6 models fit, out of 50 checkedPECRON E3800LFP lists 3,840 Wh for battery capacity, 27% more than the 3,014.4 Wh on BLUETTI Elite 300.
How we countedThe count uses each product's current fit ratings for “I need power at campsites and on weekends away”, “I want backup power for the essentials at home”, and “Solar will be a real part of how I recharge”. A need with no documented match is not counted.
How we calculatedThese are nominal watt-hour ratings. How much energy you get out depends on inverter losses, temperature and load. For context, 50 of 50 models publish comparable figures.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| PECRON E3800LFP |
|
|
|
| BLUETTI Elite 300 |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Your supported load goes above 2400W
See price & reviews on Amazon
Carry the station without needing a separate cart
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money