The catch
PECRON F3000LFP
A single unit gives you 120V but no 240V.
Side by side
PECRON F3000LFP vs E3600LFP: E3600 carries 15.7 lb more for connections and expansion, and its battery isn’t bigger
Quick verdict
For 3kWh of reserve with less weight to move, the F3000LFP is the one. The E3600LFP wins on its larger solar input, higher-current 12V output and wider expansion path. They start at the same 3072Wh and 3600W continuous AC output, so the E3600LFP’s additional 15.7 lb pays for connections and growth. The base battery is the same size.
Before you buy
Why, and what it costs you
About one fifth of the listed weight is gone with F3000LFP
The 3072Wh battery stays the same, and the weight drops about 19.9%.
Where this comes from
(79 − 63.3) ÷ 79 × 100 = 19.9%. The comparison is of the standalone stations, leaving out expansion batteries and carts.
The catch
PECRON E3600LFP
A single unit supplies 120V. To get 240V you need two stations and the matching connection box.
PECRON F3000LFP
- Why pick it
- Moving the station is part of the job, and you want to save nearly 16 lb.
- Your setup is covered by a 1600W solar limit and a 12V 10A socket.
- The catch
- A single unit gives you 120V but no 240V.
PECRON E3600LFP
- Why pick it
- Two higher-voltage solar inputs, with up to 2400W combined, are what you want.
- 12V 30A output, or the larger supported expansion capacity, is what you need.
- The catch
- A single unit supplies 120V. To get 240V you need two stations and the matching connection box.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
PECRON F3000LFP and E3600LFP compared on carrying weight, solar voltage, DC output and charging circuit requirements, with battery capacity equal.
Energy and inverter size are the same at the start, and the models diverge in solar, DC and expansion hardware.
Which one fits
Pick the situations that sound like you
I have to move the station from room to room
F3000LFP weighs 15.7 lb less.
- PECRON F3000LFP
- Better fit
- PECRON E3600LFP
- Caution
I want solar input accepted above 1600W
Across its inputs, E3600LFP accepts up to 2400W.
- PECRON F3000LFP
- Caution
- PECRON E3600LFP
- Better fit
The compatible 12V load I run needs 15A
The correctly wired 30A output has headroom, but a 10A socket falls short.
- PECRON F3000LFP
- Not suitable
- PECRON E3600LFP
- Better fit
The supplied 15A-style arrangement is the only way I can charge
With that charging arrangement, 1800W is the limit for both.
- PECRON F3000LFP
- Similar
- PECRON E3600LFP
- Similar
In practice
Differences you will notice
About one fifth of the listed weight is gone with F3000LFP
The 3072Wh battery stays the same, and the weight drops about 19.9%.
How we worked this out
(79 − 63.3) ÷ 79 × 100 = 19.9%. The comparison is of the standalone stations, leaving out expansion batteries and carts.
Under a 500W load, the base planning reserve is the same
At a steady 500W and an 80% usable-energy allowance, each estimates about 4.92 hours.
How we worked this out
3072 × 0.8 ÷ 500 = 4.9152 hours. Runtime shifts with actual inverter losses, temperature and cycling loads.
One voltage screen is failed at once by a 130V panel string
F3000LFP’s 120V ceiling is already exceeded by an array with 130V open-circuit voltage, and E3600LFP still needs a cold-voltage check against 150V.
How we worked this out
Before temperature correction, 130V is 10V over 120V and 20V under 150V. Current, connector and panel operating voltage need checking as well.
Option A
PECRON, F3000LFP
F3000LFP
This 3kWh station is for buyers who need a full 3600W of 120V output yet still have to move it around. Compared with the E3600LFP it gives up some solar and expansion headroom in exchange for a lighter main unit.
- Best for
- Taking sizable backup power between a vehicle, a workshop and home.
Facts we checked
- 3600W rated 120V AC output from a 3072Wh battery.
- About 63.3 lb.
- Solar input of 1600W, with a 25V to 120V range and a 25A maximum.
- AC charging at 1800W.
- Two EP3800 batteries are supported, for 10752Wh total capacity.
- Transfer of 8ms to 20ms as listed by the manufacturer, plus 100W USB-C.
Option B
PECRON, E3600LFP
E3600LFP
It is meant to sit alongside a larger solar or RV setup. Two solar inputs and a 30A DC output give it a practical role beyond storing 3kWh, but the 79 lb main unit is not a light carry.
- Best for
- RV and home-backup systems that have a large, compatible solar array.
Facts we checked
- One unit delivers 3600W rated output and 3072Wh capacity.
- Each of the two 1200W solar inputs has a 32V to 150V range and takes up to 20A.
- About 79 lb.
- 100W USB-C and a 12V 30A DC output.
- Total capacity of 18432Wh is supported with four EP3800 batteries.
Spec by spec
Where they really differ
| Spec | PECRON F3000LFP | PECRON E3600LFP | In practice |
|---|---|---|---|
| Base battery capacity | 3072Wh | 3072Wh | Starting energy gives neither a nominal advantage. |
| Continuous AC output | 3600W | 3600W | Combined steady appliance ceilings match. |
| Listed weight | 63.3 lb | 79 lb | F3000LFP is 15.7 lb lighter. |
| Maximum solar input | 1600W | 2400W across two inputs | From a suitable array, E3600LFP can take more. |
| High-power solar voltage range | 25V to 120V | 32V to 150V per input | The voltage window of the chosen model has to be satisfied by a panel string. |
| 12V DC output | 10A | 30A | For a properly wired compatible DC load, E3600LFP has more current headroom. |
| Maximum US AC charging | 1800W | 1800W with 15A cable or 3200W with supported 30A cable | Reaching the 3200W figure takes the specified cable and an appropriate circuit. |
| Maximum expansion capacity | 10752Wh with two EP3800 batteries | 18432Wh with four EP3800 batteries | A larger supported battery system comes with the heavier unit. |
Trade-offs
What each pick costs you
With PECRON F3000LFP
- Low-voltage portable panels need a careful check, because the main solar input requires at least 25V.
With PECRON E3600LFP
- To reach the 3200W AC recharge rate you need the correct 30A cable and supply. With a regular 15A cable you’re held to 1800W.
Decision guide
How to decide
The F3000LFP is for hauling a 3kWh reserve around. The E3600LFP is for the particular extra connections you need.
The lower model number doesn’t mean a smaller starting reserve
Both the F3000LFP and the E3600LFP hold 3072Wh and deliver up to 3600W of continuous AC power. When your equipment fits that rating, going with the lighter F3000LFP costs you no nominal energy. What matters is whether the E3600LFP’s additional solar inputs, higher-current DC connection and expansion support are worth its extra weight.
Look at your solar string before picking a station
The E3600LFP has two solar inputs and a higher 150V ceiling, whereas the F3000LFP’s high-power input stops at 120V. Whether an existing panel arrangement fits can hinge on those differences. Add up the panels’ open-circuit voltages, allow for colder conditions and check current too. No high solar wattage rating makes an over-voltage string safe.
Fast wall charging depends on the right electrical supply
The E3600LFP’s 3200W AC charging figure assumes the supported 30A cable and a suitable circuit. In 15A-cable mode it tops out at 1800W, the same maximum as the F3000LFP. Don’t assume the larger headline is available from ordinary household outlets. Follow the manual, and have a qualified electrician check any fixed electrical work.
What this page can’t tell you
- On its own, neither unit supplies native 240V, and supported multi-unit arrangements call for additional equipment.
- The solar and DC screens don’t amount to complete installation designs.
By the numbers
What the data shows
What we found across the portable power stations we compare, plus the checked facts behind each finding.
How many fit
25 of the 50 models checked meet every need here: “I want backup power for the essentials at home”, “Solar will be a real part of how I recharge”, and “I might expand battery capacity later”.
25 models fit, out of 50 checkedShow the facts and the math
How we countedThe count uses each product's current fit ratings for “I want backup power for the essentials at home”, “Solar will be a real part of how I recharge”, and “I might expand battery capacity later”. A need with no documented match is not counted.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| PECRON F3000LFP |
|
|
|
| PECRON E3600LFP |
|
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
PECRON F3000LFP
Moving the station is part of the job, and you want to save nearly 16 lb.
See price & reviews on AmazonPECRON E3600LFP
Two higher-voltage solar inputs, with up to 2400W combined, are what you want.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money