The catch
Anker SOLIX F3800
At 132.3 lb, stairs and loading into a vehicle need serious thought.
Side by side
Native 240V output and high-power home equipment point to the F3800. If 120V use is enough, the Elite 400 offers the same base energy at much less weight.
Before you buy
At a steady 300W load, the model gives Anker SOLIX F3800 about 10.2 hours and BLUETTI Elite 400 10.2 hours.
Where this comes from
Using inputs of 3840Wh and 3840Wh, hours = nominal Wh × 0.8 / 300W. The 80% factor works as a planning allowance for unusable energy and conversion losses, shared by both, rather than a measured efficiency. Runtime changes with idle draw, temperature and the real load.
The catch
At 132.3 lb, stairs and loading into a vehicle need serious thought.
The catch
Wheels make level ground easy, yet stairs and loading it into a car still mean handling 86 lb.


We may earn a commission from qualifying Amazon purchases. How we make money
The F3800 is the choice for native 240V output and high-power home equipment. For 120V use, the Elite 400 gives the same base energy at much less weight.
Voltage comes before runtime
Which one fits
The F3800 supports native 120V and 240V output, while the Elite 400 is a 120V station. Plenty of battery capacity alone cannot make a 240V appliance compatible.
Each stores 3,840Wh. The F3800’s 6,000W inverter can serve larger supported loads, yet it doesn’t make the same small load run any longer.
Using the common planning assumptions, Anker SOLIX F3800 reaches 10.2 hours and BLUETTI Elite 400 reaches 10.2. Measure the real wattage before choosing an overnight reserve you require.
Anker SOLIX F3800 accepts up to 2400W of input and BLUETTI Elite 400 up to 1000W. Compare your panel strings with the voltage and current limits as well as with this total.
In practice
At a steady 300W load, the model gives Anker SOLIX F3800 about 10.2 hours and BLUETTI Elite 400 10.2 hours.
Using inputs of 3840Wh and 3840Wh, hours = nominal Wh × 0.8 / 300W. The 80% factor works as a planning allowance for unusable energy and conversion losses, shared by both, rather than a measured efficiency. Runtime changes with idle draw, temperature and the real load.
BLUETTI Elite 400 stores 44.7 nominal watt-hours per pound, but Anker SOLIX F3800 stores about 29.
Divide nominal energy by published weight and you get 3840 / 132.3 and 3840 / 86. The comparison is stored energy per lifted weight. It involves no measurement of efficiency or handle comfort.
Elite 400 is 120V with 2600W, while F3800 brings native 240V and a 6000W ceiling at the price of 46.3 lb more weight.
Both batteries are 3840Wh, and 132.3 - 86 = 46.3 lb. Output voltage and continuous ratings are constraints of their own.

Anker, A1790
A self-contained choice for when a real 240V load means smaller 120V stations won’t do. It’s made to roll into a planned backup setup, and it brings a large inverter and room for more batteries.

BLUETTI, Elite 400
On wheels and aimed at long outages with moderate loads, this battery stores far more energy than a 2kWh station. Its 2600W inverter can’t run every large appliance at once, though.
Spec by spec
| Spec | Anker SOLIX F3800 | BLUETTI Elite 400 | In practice |
|---|---|---|---|
| Nominal battery energy | 3840 Wh | 3840 Wh | The starting runtime budget comes from stored energy. |
| Continuous AC output | 6000 W | 2600 W | Load screening uses this sustained rating, which is separate from surge and boost modes. |
| Lifting weight | 132.3 lb | 86 lb | Flat ground is where wheels help. A trunk, step or shelf still takes a lift. |
| Maximum solar input | 2400 W | 1000 W | Panel voltage, current and per-port limits have to fit as well. |
| Dedicated battery expansion | Supported with compatible equipment | Fixed base capacity | Integrated battery expansion is not the same as charging from an external source. |
Trade-offs
Decision guide
Pick the F3800 for native 240V output and high-power home equipment. Pick the Elite 400 for 120V use at the same base energy and much less weight.
The F3800 supports native 120V and 240V output, while the Elite 400 is a 120V station. Plenty of battery capacity alone cannot make a 240V appliance compatible.
Each stores 3,840Wh. The F3800’s 6,000W inverter can serve larger supported loads, yet it doesn’t make the same small load run any longer.
At 132.3 pounds versus 86, the F3800 is far heavier. Both use wheels, and both still need safe handling around steps. Home circuits can only be connected through the correct approved transfer equipment.
By the numbers
What we found across the portable power stations we compare, plus the checked facts behind each finding.
Only 6 of the 50 models checked meet every need here: “I need power at campsites and on weekends away”, “I want backup power for the essentials at home”, and “Solar will be a real part of how I recharge”.
6 models fit, out of 50 checkedAnker SOLIX F3800 lists 6,000 W for continuous AC output rating, 131% more than the 2,600 W on BLUETTI Elite 400.
How we countedThe count uses each product's current fit ratings for “I need power at campsites and on weekends away”, “I want backup power for the essentials at home”, and “Solar will be a real part of how I recharge”. A need with no documented match is not counted.
How we calculatedFigures are the continuous output rating. Surge numbers and boost modes that lower voltage do not count. For context, 47 of 50 models publish comparable figures.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Anker SOLIX F3800 |
|
|
|
| BLUETTI Elite 400 |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Your appliance requires native 240V
See price & reviews on Amazon
Your loads run on standard 120V
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money