The catch
Dreame L10s Ultra Gen 2
For thick rugs, a 10.5 mm mop lift is no substitute for automatic mop detachment.
Side by side
The L40 Ultra Gen 2 is the pick if its extending side brush deals with debris that gets missed around edges and furniture legs. The L10s Ultra Gen 2 is the pick when extending-mop cleaning is mostly what you want, at a better price. Each has a 350 mm square body, roughly 97 mm height and a 10.5 mm mop lift, and neither offers automatic mop detachment.
Before you buy
Each takes up a 350 × 350 mm body envelope. A slightly lower rounded height does not make L40 a smaller robot.
Where this comes from
350 × 350 = 122,500 mm² for each published body footprint. A protruding brush and operating clearance are left out.
The catch
For thick rugs, a 10.5 mm mop lift is no substitute for automatic mop detachment.
The catch
Gen 2 can't leave its mops at the dock on its own, which around thick rugs can matter more than its higher suction number.


We may earn a commission from qualifying Amazon purchases. How we make money
With about 97 mm of height and the same body footprint, the Gen 2 robots are close. Compare edge-brush reach, mop care and the differences that suction numbers hide.
Which one fits
The stated heights differ by a negligible amount.
The side brush extends on the L40.
An extending mop comes on each.
Not supported by either.
In practice
Each takes up a 350 × 350 mm body envelope. A slightly lower rounded height does not make L40 a smaller robot.
350 × 350 = 122,500 mm² for each published body footprint. A protruding brush and operating clearance are left out.
When planning furniture access, count these robots as the same height. For a tight opening, the practical margin has to be much larger than that.
97.2 - 97 = 0.2 mm. The precision of the manufacturer's dimensions does not support claiming a meaningful real-world clearance advantage.
A mop extends on both already. L40 also extends its side brush, which changes how far it reaches dry debris before the mop passes.
MopExtend appears in the L10s Gen 2 specification. Alongside its extending mop, L40 Gen 2 adds an extending side brush.

Dreame, L10s Ultra Gen 2
The body stands just under 3.83 inches tall, and an extending mop and wash-and-dry dock take care of routine hard-floor cleaning.

Dreame, L40 Ultra Gen 2
Edges are covered by an extending side brush and mop, and the body is shorter than the original L40's. What the newer generation gives up is automatic mop removal.
Spec by spec
| Spec | Dreame L10s Ultra Gen 2 | Dreame L40 Ultra Gen 2 | In practice |
|---|---|---|---|
| Body width and depth | 350 × 350 mm | 350 × 350 mm | In a tight passage, neither is the narrower one. |
| Body height | 97.2 mm | 97 mm | A clearance advantage of 0.2 mm is not a useful one. |
| Mop lift | 10.5 mm | 10.5 mm | On this specification, rug planning comes out the same. |
| Edge hardware | Extending mop, fixed-position side brush | Extending mop and side brush | For dry debris, L40 adds brush reach outward. |
| Automatic mop detachment | No | No | The pads stay attached on both. |
| Rated suction | 10,000 Pa | 25,000 Pa | A ratio of ratings is no ratio of pickup performance. |
Trade-offs
Decision guide
Near a cabinet, an extending mop wets a strip, while an extending side brush can sweep dry debris from that area toward the vacuum path. When crumbs and grit are the problem and not the wet-cleaning strip, L40's extra mechanism is the more relevant difference.
Published heights are 0.2 mm apart, and floor joints, furniture fabric and measurement tolerances matter more than that. If the L10s cannot comfortably enter a space, do not assume the L40 will manage it.
Pads stay attached and lift on both, rather than being left at the station, and a higher suction rating does not alter that physical arrangement. If thick rugs must stay dry, pick suitable route settings or compare a model with automatic mop removal.
By the numbers
What we found across the robot vacuums we compare, plus the checked facts behind each finding.
Only 9 of the 52 models checked meet every need here: “I care about mopping as much as vacuuming”, “Edges and corners are what bug me”, and “It has to get under my low furniture”.
9 models fit, out of 52 checkedDreame L40 Ultra Gen 2 lists 25,000 Pa for suction rating, 150% more than the 10,000 Pa on Dreame L10s Ultra Gen 2.
How we countedThe count uses each product's current fit ratings for “I care about mopping as much as vacuuming”, “Edges and corners are what bug me”, and “It has to get under my low furniture”. A need with no documented match is not counted.
How we calculatedThese are the pascal ratings makers publish. Brush design, airflow and software still affect how well a robot cleans. For context, 34 of 52 models publish comparable figures.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Dreame L10s Ultra Gen 2 |
|
|
|
| Dreame L40 Ultra Gen 2 |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

You want extending-mop cleaning and don't want to pay for the extra edge-brush mechanism.
See price & reviews on Amazon
You keep finding debris next to furniture legs and edges.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money