The catch
BISSELL CrossWave OmniForce
During dry-only cleaning you have to check the tank yourself. In mixed sessions run PowerVac first and PowerMop after, then give washed parts 24 hours before putting them back together.
Side by side
BISSELL CrossWave OmniForce vs Pet Pro: Pet Pro skips a battery recharge pause, OmniForce can vacuum dry first
Quick verdict
OmniForce is the pick if you want a dedicated dry-vacuum mode that lets you decide afterward whether to mop. Pet Pro is the pick for corded washing with a pet-hair strainer and no pause to recharge a battery. Either can refresh suitable area rugs, and neither takes the place of a carpet extractor. On rugs, follow the rug care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. In a mixed session, run PowerVac before PowerMop, and expect washed parts to need 24-hour drying.
Before you buy
Why, and what it costs you
Not every pet-hair job needs a wet pass
OmniForce lets you run PowerVac for dry hair and crumbs, then switch to PowerMop where washing is needed. That suits a home where the floor is hairy more often than it is sticky. Use PowerVac before PowerMop in a mixed session. Washed parts need 24-hour drying.
Where this comes from
PowerVac and PowerMop are documented by BISSELL as separate modes. Its support instructions advise dry pickup first before a wet pass.
The catch
BISSELL CrossWave Pet Pro
Adding solution means holding the trigger
BISSELL CrossWave OmniForce
- Why pick it
- Much of the time I just want dry hair picked up and no washing
- The cleaner is cordless, and PowerVac is a setting dedicated to dry vacuuming
- The catch
- During dry-only cleaning you have to check the tank yourself. In mixed sessions run PowerVac first and PowerMop after, then give washed parts 24 hours before putting them back together.
BISSELL CrossWave Pet Pro
- Why pick it
- Long washing sessions close to outlets are what I do
- With the 25-foot cord there is no charging, and the tank has a pet-hair strainer
- The catch
- Adding solution means holding the trigger
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
CrossWave OmniForce or Pet Pro? Look at dry pet hair, area rugs and longer washing sessions, and at how PowerVac differs from a spray trigger.
OmniForce is the pick if you want a dedicated dry-vacuum mode that lets you decide afterward whether to mop. Pet Pro is the pick for corded washing with a pet-hair strainer and no pause to recharge a battery. Either can refresh suitable area rugs, and neither takes the place of a carpet extractor. On rugs, follow the rug care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. In a mixed session, run PowerVac before PowerMop, and expect washed parts to need 24-hour drying.
Which one fits
Pick the situations that sound like you
Dry hair, no wet pass
OmniForce comes with a dedicated PowerVac.
- BISSELL CrossWave OmniForce
- Better fit
- BISSELL CrossWave Pet Pro
- Depends
A long session close to outlets
Pet Pro needs no charging.
- BISSELL CrossWave OmniForce
- Good
- BISSELL CrossWave Pet Pro
- Better fit
Area-rug refreshing
Both allow suitable rugs. For OmniForce rugs, the care and formula restriction applies. For rugs, follow their care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize.
- BISSELL CrossWave OmniForce
- Good
- BISSELL CrossWave Pet Pro
- Good
Pulling urine deep out of carpet
None of these floor washers is a carpet extractor.
- BISSELL CrossWave OmniForce
- Not suitable
- BISSELL CrossWave Pet Pro
- Not suitable
In practice
Differences you will notice
Not every pet-hair job needs a wet pass
OmniForce lets you run PowerVac for dry hair and crumbs, then switch to PowerMop where washing is needed. That suits a home where the floor is hairy more often than it is sticky. Use PowerVac before PowerMop in a mixed session. Washed parts need 24-hour drying.
How we worked this out
PowerVac and PowerMop are documented by BISSELL as separate modes. Its support instructions advise dry pickup first before a wet pass.
Dry-only cleaning means you watch the tank differently
A tank filled only with dry debris goes undetected by OmniForce’s water-level sensor, so check it yourself during a long hair pickup. Both models have a strainer that separates solids during disposal. That shared feature doesn't take away OmniForce’s extra dry-tank monitoring step.
How we worked this out
In the OmniForce support guide you'll find its removable debris strainer and the full-tank sensor limit in dry-only use. Pet Pro also documents a pet-hair strainer.
Turbo cuts the cordless runtime by 40%
In regular modes OmniForce is rated up to 30 minutes, and in Turbo 18 minutes. If you expect to run Turbo the whole time, plan around 18. Pet Pro sidesteps that battery limit but leaves a cord on the floor.
How we worked this out
Calculation: (30 − 18) ÷ 30 × 100 = 40%. This compares mode ratings. It does not measure pickup performance.
Option A
BISSELL, 3882
CrossWave OmniForce
Cordless machine that vacuums dry and washes, built for suitable hard floors and for permitted rugs when you use rug-approved BISSELL formula. Hard Floor Sanitize never goes on rugs. In mixed sessions dry cleaning comes before wet, and washed parts then need 24-hour drying.
- Best for
- Much of the time I just want dry hair picked up and no washing
Facts we checked
- Dry-only control: Dedicated PowerVac mode
- Power: Cordless
- Runtime: Up to 30 minutes, 18 in Turbo
- Hair disposal: Removable debris strainer, inspect during dry-only use
Option B
BISSELL, 2306A
CrossWave Pet Pro
Corded CrossWave with a pet-hair strainer and a spray trigger. It washes hard floors and can refresh suitable area rugs.
- Best for
- Long washing sessions close to outlets are what I do
Facts we checked
- Dry-only control: Manual solution trigger
- Power: 25-foot cord
- Runtime: No battery runtime limit
- Hair disposal: Pet-hair strainer
Spec by spec
Where they really differ
| Spec | BISSELL CrossWave OmniForce | BISSELL CrossWave Pet Pro | In practice |
|---|---|---|---|
| Dry-only control | Dedicated PowerVac mode | Manual solution trigger | Not spraying is not the same as having a named dry-vacuum mode. |
| Power | Cordless | 25-foot cord | The choice is between cable routing and charging. |
| Runtime | Up to 30 minutes, 18 in Turbo | No battery runtime limit | The cordless planning window shifts with Turbo. |
| Hair disposal | Removable debris strainer, inspect during dry-only use | Pet-hair strainer | Solids get separated on both, but OmniForce requires you to monitor tank fill by hand in dry-only use. |
| Area rugs | Supported surface refreshing | Supported surface refreshing | Neither is a deep carpet-extraction machine. For rugs, follow their care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. |
Trade-offs
What each pick costs you
With BISSELL CrossWave OmniForce
- It has no powered roller drying. To refresh a rug you need the rug maker’s permission plus rug-approved BISSELL formula, and the included Hard Floor Sanitize must never be used on rugs.
With BISSELL CrossWave Pet Pro
- Lacks heated roller drying
Change of plan
When the answer changes
Much of the time I just want dry hair picked up and no washing
Go with BISSELL CrossWave OmniForce. The cleaner is cordless, and PowerVac is a setting dedicated to dry vacuuming
Long washing sessions close to outlets are what I do
Go with BISSELL CrossWave Pet Pro. With the 25-foot cord there is no charging, and the tank has a pet-hair strainer
Decision guide
How to decide
For a dedicated dry-vacuum mode that comes before any decision to mop, OmniForce is the one. For corded washing with a pet-hair strainer and no battery recharge pause, Pet Pro is the one. Both can refresh suitable area rugs, though neither is a replacement for a carpet extractor. Rug care instructions apply, and only rug-approved BISSELL formula should be used, never Hard Floor Sanitize. In a mixed session PowerVac runs before PowerMop, and washed parts need 24-hour drying.
Dry-only cleaning means you watch the tank differently
A tank filled only with dry debris is not picked up by the water-level sensor on OmniForce, so check it yourself during a long hair pickup. Each model has a strainer that separates solids when you dispose of them. Sharing that feature does not spare you OmniForce’s extra step of watching the dry tank. The OmniForce support guide documents its removable debris strainer and the full-tank sensor limit in dry-only use, and Pet Pro documents a pet-hair strainer too.
Turbo cuts the cordless runtime by 40%
Regular modes on OmniForce are rated up to 30 minutes and Turbo 18 minutes. Expecting to run Turbo the whole time means planning around 18. The battery limit does not apply to Pet Pro, though its cord stays on the floor. Calculation: (30 − 18) ÷ 30 × 100 = 40%. It compares mode ratings and not pickup performance.
What this page can’t tell you
- Nothing in this comparison ranks measured pickup, noise, sanitizing performance or pet comfort. It is built from documented designs and operating limits. Take solid pet waste out separately and follow the care instructions for the floor and the machine.
By the numbers
What the data shows
What we found across the wet-dry floor cleaners we compare, plus the checked facts behind each finding.
Show the facts and the math
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| BISSELL CrossWave OmniForce |
|
|
|
| BISSELL CrossWave Pet Pro |
|
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
BISSELL CrossWave OmniForce
Much of the time I just want dry hair picked up and no washing
The cleaner is cordless, and PowerVac is a setting dedicated to dry vacuuming
See price & reviews on AmazonBISSELL CrossWave Pet Pro
Long washing sessions close to outlets are what I do
With the 25-foot cord there is no charging, and the tank has a pet-hair strainer
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money