The catch
BISSELL CrossWave OmniForce
During dry-only cleaning you have to check the tank yourself. In mixed sessions run PowerVac first and PowerMop after, then give washed parts 24 hours before putting them back together.
Side by side
BISSELL CrossWave OmniForce vs Tineco Stretch S6: OmniForce takes care of permitted rugs, and S6 washes flat beneath compatible furniture
Quick verdict
Dry pickup and permitted rug refreshing are the reasons to choose OmniForce. On rugs, follow their care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. In a mixed session, run PowerVac before PowerMop, and washed parts need 24-hour drying. Choose S6 for flat washing on compatible hard floors where the whole moving machine fits, or for powered roller drying with the specified dock setup and manual part care.
Before you buy
Why, and what it costs you
Picking up dry debris and picking up water are separate modes
OmniForce PowerVac collects dry debris. S6 Suction collects water. Use PowerVac before PowerMop in a mixed session. Washed parts need 24-hour drying. This mode difference does not permit S6 rug cleaning.
Where this comes from
The exact manuals define the modes differently.
The catch
Tineco FLOOR ONE Stretch S6
The nominal 5.1-inch body figure is no promise of full working clearance. Check that the head, wheels and handle all fit along the whole route
BISSELL CrossWave OmniForce
- Why pick it
- Permitted rug refreshing matters to me, using rug-approved BISSELL formula and never Hard Floor Sanitize
- In a mixed session, PowerVac goes before PowerMop. Washed parts then need 24-hour drying.
- The catch
- During dry-only cleaning you have to check the tank yourself. In mixed sessions run PowerVac first and PowerMop after, then give washed parts 24 hours before putting them back together.
Illustration from the maker. The faded outlines show a single cleaner tilting back. The orange swirl inside is only for illustration. Washing with it laid flat needs compatible hard floors and full working clearance. Keep it upright to carry and dock it.
Tineco FLOOR ONE Stretch S6
- Why pick it
- Flat washing matters to me, on compatible hard floors with full working clearance beyond the nominal 5.1-inch body
- Powered roller drying appeals to me, given a powered dock, a battery above 25%, clean water above 40% and a cleaned dirty tank. Manual care remains
- The catch
- The nominal 5.1-inch body figure is no promise of full working clearance. Check that the head, wheels and handle all fit along the whole route
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
OmniForce and Stretch S6 compared for dry pet hair, rugs, washing under the bed and roller drying. Choose the cleaner that handles the job your current one misses.
Dry pickup and permitted rug refreshing are the reasons to choose OmniForce. On rugs, follow their care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. In a mixed session, run PowerVac before PowerMop, and washed parts need 24-hour drying. Choose S6 for flat washing on compatible hard floors where the whole moving machine fits, or for powered roller drying with the specified dock setup and manual part care.
Which one fits
Pick the situations that sound like you
Dry debris sitting on a permitted rug
Suitable rugs are supported by OmniForce PowerVac. Check the rug care instructions.
- BISSELL CrossWave OmniForce
- Better fit
- Tineco FLOOR ONE Stretch S6
- Not suitable
Wet-refreshing a permitted rug
For rugs, follow their care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. Use PowerVac before PowerMop in a mixed session. Washed parts need 24-hour drying.
- BISSELL CrossWave OmniForce
- Better fit
- Tineco FLOOR ONE Stretch S6
- Not suitable
Muddy prints under furniture on hard floors that are compatible
The S6 allows flat washing only if the complete moving machine fits.
- BISSELL CrossWave OmniForce
- Caution
- Tineco FLOOR ONE Stretch S6
- Better fit
Roller drying with power, using its required setup
The S6 requires powered docking, battery above 25%, clean water above 40% and a cleaned dirty tank. Manual care and full drying are still needed.
- BISSELL CrossWave OmniForce
- Caution
- Tineco FLOOR ONE Stretch S6
- Better fit
Contamination from solid waste or carpet padding
Take out solid waste on its own. Neither one is a carpet extractor.
- BISSELL CrossWave OmniForce
- Not suitable
- Tineco FLOOR ONE Stretch S6
- Not suitable
In practice
Differences you will notice
Picking up dry debris and picking up water are separate modes
OmniForce PowerVac collects dry debris. S6 Suction collects water. Use PowerVac before PowerMop in a mixed session. Washed parts need 24-hour drying. This mode difference does not permit S6 rug cleaning.
How we worked this out
The exact manuals define the modes differently.
Where the mess is can flip the choice
A permitted rug favors OmniForce. For rugs, follow their care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. Muddy marks beneath furniture favor S6 only on compatible hard floors with full moving clearance. Its 5.1-inch body is a screening figure. It does not guarantee a complete fit.
How we worked this out
This use case comes down to surface permission and the full operating route.
Powered roller drying still leaves parts to dry on a shelf
With the specified dock setup, S6 provides powered roller care, but removed filters and manually washed parts still have to dry fully. OmniForce has no heated drying and needs 24 hours for washed parts before reassembly. Neither cycle duration is total cleanup time.
How we worked this out
For the S6 you need powered docking, battery above 25%, clean water above 40% and a cleaned dirty tank.
Option A
BISSELL, 3882
CrossWave OmniForce
Cordless machine that vacuums dry and washes, built for suitable hard floors and for permitted rugs when you use rug-approved BISSELL formula. Hard Floor Sanitize never goes on rugs. In mixed sessions dry cleaning comes before wet, and washed parts then need 24-hour drying.
- Best for
- Permitted rug refreshing matters to me, using rug-approved BISSELL formula and never Hard Floor Sanitize
Facts we checked
- Dry-only mode: Dedicated PowerVac
- Area rugs: Supported
- Lie-flat washing: Not documented
- Roller drying: No powered cycle, with 24-hour part drying
Option B
Illustration from the maker. The faded outlines show a single cleaner tilting back. The orange swirl inside is only for illustration. Washing with it laid flat needs compatible hard floors and full working clearance. Keep it upright to carry and dock it.
Tineco, FLOOR ONE Stretch S6
FLOOR ONE Stretch S6
Washes compatible wet-cleanable hard floors under furniture, provided the whole machine can move through the space. Powered roller drying requires the specified dock setup, and some parts still need manual care.
- Best for
- Flat washing matters to me, on compatible hard floors with full working clearance beyond the nominal 5.1-inch body
Facts we checked
- Dry-only mode: Suction mode for water pickup
- Area rugs: Not supported
- Lie-flat washing: Permitted on suitable hard floors
- Roller drying: Powered cycle with specified setup
Spec by spec
Where they really differ
| Spec | BISSELL CrossWave OmniForce | Tineco FLOOR ONE Stretch S6 | In practice |
|---|---|---|---|
| Dry-only mode | Dedicated PowerVac | Suction mode for water pickup | PowerVac is not equivalent to Tineco’s Suction label. |
| Area rugs | Supported | Not supported | Rug support favors OmniForce. For rugs, follow their care instructions and use rug-approved BISSELL formula, never Hard Floor Sanitize. |
| Lie-flat washing | Not documented | Permitted on suitable hard floors | Beyond its nominal 5.1-inch body, the S6 needs full moving clearance. |
| Roller drying | No powered cycle, with 24-hour part drying | Powered cycle with specified setup | The S6 calls for powered docking, battery above 25%, water above 40% and a cleaned dirty tank. Manual care is still needed. |
| Maximum runtime | 30 minutes, 18 in Turbo | 40 minutes maximum | Because the modes differ, no matched endurance conclusion is possible. |
Trade-offs
What each pick costs you
With BISSELL CrossWave OmniForce
- It has no powered roller drying. To refresh a rug you need the rug maker’s permission plus rug-approved BISSELL formula, and the included Hard Floor Sanitize must never be used on rugs.
With Tineco FLOOR ONE Stretch S6
- Its suction mode picks up water rather than working as a dry vacuum
Change of plan
When the answer changes
Permitted rug refreshing matters to me, using rug-approved BISSELL formula and never Hard Floor Sanitize
Go with BISSELL CrossWave OmniForce. In a mixed session, PowerVac goes before PowerMop. Washed parts then need 24-hour drying.
Flat washing matters to me, on compatible hard floors with full working clearance beyond the nominal 5.1-inch body
Go with Tineco FLOOR ONE Stretch S6. Powered roller drying appeals to me, given a powered dock, a battery above 25%, clean water above 40% and a cleaned dirty tank. Manual care remains
Decision guide
How to decide
OmniForce covers dry pickup and permitted rug refreshing, and rugs call for following their care instructions and using rug-approved BISSELL formula, never Hard Floor Sanitize. In a mixed session PowerVac runs before PowerMop, and washed parts need 24-hour drying. S6 covers flat washing on compatible hard floors where the whole moving machine fits, as well as powered roller drying with the specified dock setup and manual part care.
Picking up dry debris and picking up water are separate modes
PowerVac on OmniForce collects dry debris, whereas Suction on the S6 collects water. In a mixed session, PowerVac comes before PowerMop, and washed parts need 24-hour drying. This difference between modes does not make rug cleaning permitted on the S6. The exact manuals define the modes differently.
Powered roller drying still leaves parts to dry on a shelf
Powered roller care on the S6 depends on the specified dock setup, and removed filters and manually washed parts still have to dry fully. OmniForce has no heated drying, and washed parts need 24 hours before reassembly. Neither cycle duration is the same as total cleanup time. For the S6 you need powered docking, a battery above 25%, clean water above 40% and a cleaned dirty tank.
What this page can’t tell you
- Only documented designs and operating limits are compared here. Measured pickup, noise, sanitizing performance and pet comfort are not ranked. Remove solid pet waste separately, and follow the care instructions for the floor and the machine.
By the numbers
What the data shows
What we found across the wet-dry floor cleaners we compare, plus the checked facts behind each finding.
Show the facts and the math
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| BISSELL CrossWave OmniForce |
|
|
|
| Tineco FLOOR ONE Stretch S6 |
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
BISSELL CrossWave OmniForce
Permitted rug refreshing matters to me, using rug-approved BISSELL formula and never Hard Floor Sanitize
In a mixed session, PowerVac goes before PowerMop. Washed parts then need 24-hour drying.
See price & reviews on AmazonIllustration from the maker. The faded outlines show a single cleaner tilting back. The orange swirl inside is only for illustration. Washing with it laid flat needs compatible hard floors and full working clearance. Keep it upright to carry and dock it.
Tineco FLOOR ONE Stretch S6
Flat washing matters to me, on compatible hard floors with full working clearance beyond the nominal 5.1-inch body
Powered roller drying appeals to me, given a powered dock, a battery above 25%, clean water above 40% and a cleaned dirty tank. Manual care remains
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money