The catch
Alen BreatheSmart 75i V2
Both the purifier itself and the Fresh replacement filter are costly.
Side by side
For a large room and for handling gases, the 75i V2 is stronger. The A3 comes out ahead when slim wall mounting, customizable filters and a quieter bedroom design count for more than maximum CADR.
Before you buy
The published “Smoke CADR” figure is 44% higher on Alen BreatheSmart 75i V2: 370 CFM, against 257 CFM on Rabbit Air A3.
Where this comes from
Higher published output is useful only if your room, surface or workload calls for the extra headroom. It does not, by itself, prove better results. The percentage comes from the lower published figure.
The catch
Both the purifier itself and the Fresh replacement filter are costly.
The catch
For the particle CADR you get, the premium purchase price is steep.


We may earn a commission from qualifying Amazon purchases. How we make money
Room size, carbon, sensing, wall mounting and filter life drive this premium smart purifier match-up.
This one comes down to smoke cadr and gas filter first, then to the limits of your own setup.
Day to day
Rabbit A3 gets the purifier off the floor, which is valuable in a crowded room. Still, a 400-square-foot room with a nine-foot ceiling needs 300 CFM to hit a five-air-change planning target. Its 257 smoke CADR is under that figure, and Alen's 370 clears it at rated conditions. Go with Rabbit when its room demand fits and a wall placement clears the obstruction. Go with Alen when the larger particle-delivery requirement is firm.
400 times 9 times 5, divided by 60, comes to 300 CFM. A wall mount does not raise rated delivery, and neither maximum shows what comes out at the lowest sound setting.
The 3.6-pound carbon specification for Alen applies to the Fresh filter option. Rabbit pairs pellet carbon with a specialty stage you select. When odor-related media is central to the purchase, compare the filter configurations you select and their replacement codes before deciding. Don't give every 75i package credit for the Fresh loading, and don't treat each A3 specialty choice as the same filter. When particles are the main problem, rely on the matched CADR evidence.
This is a limit that comes from accessory configuration. Differences in media chemistry, quantity and loading mean a plain filter-weight comparison cannot prove odor removal or gas breakthrough time.
Which one fits
For a larger connected space, its high verified airflow makes it a credible place to start.
Alen BreatheSmart 75i V2 lists “Fresh option with 3.6 pounds carbon” for gas filter, while Rabbit Air A3 lists “Pellet carbon plus selectable specialty stage”. This shows what the treatment path is designed to catch or reduce, and the upkeep it needs.
In a room of the right size, its verified particle airflow and filter path are a good match for airborne pollen.
Alen BreatheSmart 75i V2 lists “370 CFM” for smoke cadr, while Rabbit Air A3 lists “257 CFM”. Extra published output only helps when your room, surface or workload needs the headroom. On its own, it does not prove better results.
Airflow aimed at dust can cut down particles while they are still in the air. Dust that has already settled stays where it is.
Useful particle airflow and documented gas media come together in it. Particle CADR by itself says nothing about odor removal.
In practice
The published “Smoke CADR” figure is 44% higher on Alen BreatheSmart 75i V2: 370 CFM, against 257 CFM on Rabbit Air A3.
Higher published output is useful only if your room, surface or workload calls for the extra headroom. It does not, by itself, prove better results. The percentage comes from the lower published figure.
Plug in your numbers
This checks hard limits only. Personal preferences are left out of the math.
370 CFM of verified clean-air delivery works out to about 9.3 air changes per hour in this room. Hitting the 5 ACH target takes 200 CFM.
257 CFM of verified clean-air delivery works out to about 6.4 air changes per hour in this room. Hitting the 5 ACH target takes 200 CFM.
This uses each model’s pollutant-specific CADR at top speed and a target of five air changes per hour. Quieter settings clean less air. Raw airflow and one-change coverage claims are never swapped in.

Alen, BreatheSmart 75i_V2
Premium and high in CADR, it comes with a deep Fresh carbon filter, a wide range of sensors, wheels and a well-developed app.

Rabbit Air, SPA-1000N
Slim enough to hang on a wall, this purifier offers customizable filters, pellet carbon, app control and an ionizer you can switch on or off.
Spec by spec
| Spec | Alen BreatheSmart 75i V2 | Rabbit Air A3 | In practice |
|---|---|---|---|
| Smoke CADR | 370 CFM | 257 CFM | Higher published output is useful only if your room, surface or workload calls for the extra headroom. It does not, by itself, prove better results. |
| Gas filter | Fresh option with 3.6 pounds carbon | Pellet carbon plus selectable specialty stage | It shows what the treatment path is built to catch or reduce, and what upkeep that requires. |
| Placement | Floor unit with wheels | Floor or wall mounted | Fit can be a hard limit, so measure your space and mounting points before anything else. |
| Ionizer | Optional and switchable | Optional and switchable | Both models show the same result for “Ionizer”, so this row won't decide between them. |
Trade-offs
By the numbers
What we found across the air purifiers we compare, plus the checked facts behind each finding.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Alen BreatheSmart 75i V2 |
|
| |
| Rabbit Air A3 |
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Considerably more smoke airflow is a requirement.
See price & reviews on Amazon
Mounting it on the wall fixes a placement problem.
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money