The catch
JVC DLA-NZ800
The chassis is far heavier and may call for a different mount, and low-latency mode turns off some cinema features.
Side by side
JVC DLA-NZ800 vs Epson QB1000: Epson puts less weight on the mount, JVC adds 3D
Quick verdict
The NZ800 is for a native-4K D-ILA theater where its movie features and 3D support justify the installation. The QB1000 is for a room that suits a lighter chassis and its powered 3LCD setup better. 4K/120 is accepted by both, but JVC’s low-latency mode changes which movie-processing features stay available.
Before you buy
Why, and what it costs you
A thirty-pound mount rating settles the question right away
NZ800 weighs 50.8 lb, which is more than a mount rated for thirty pounds can take. QB1000’s 28.2 lb chassis stays under that headline limit, though the hardware, structural fixing and installation instructions still need checking. The JVC weighs 22.6 lb more, about 80 percent heavier, so don’t reuse the mount without verifying it.
Where this comes from
JVC DLA-NZ800: Projector weight 50.8 lb. Epson QB1000: Projector weight 28.2 lb. Difference 22.6 lb, ratio about 1.80. Example mount rating is hypothetical.
The catch
Epson QB1000
No 3D playback appears in its US guide, and its panels get to a 4K picture through pixel shifting.
JVC DLA-NZ800
- Why pick it
- Native-4K D-ILA and 3D matter for your movie collection
- Your mount and the structure holding it are rated for its 50.8 lb chassis
- The catch
- The chassis is far heavier and may call for a different mount, and low-latency mode turns off some cinema features.
Epson QB1000
- Why pick it
- A much lighter projector is what the installation calls for
- Simultaneous-color 3LCD with powered optics is what you are after
- The catch
- No 3D playback appears in its US guide, and its panels get to a 4K picture through pixel shifting.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
Film fans and gamers sharing one theater? Compare the JVC DLA-NZ800 and Epson QB1000 on mount load, movie processing and 4K/120, with no invented test results.
Which one fits
Pick the situations that sound like you
A current mount rated under 50.8 lb
JVC is over the limit. Epson still needs its full load and fixing checked.
- JVC DLA-NZ800
- Not suitable
- Epson QB1000
- Depends
A family’s 3D Blu-ray collection
3D playback is documented for JVC but not in Epson’s guide. Look into the accessories.
- JVC DLA-NZ800
- Better fit
- Epson QB1000
- Caution
A gaming source compatible with 4K/120
The format is accepted by both, which doesn’t prove they respond the same in games.
- JVC DLA-NZ800
- Good
- Epson QB1000
- Good
Wanting every cinema processing feature during low-latency gaming
Under ALLM, JVC specifically turns off several cinema features. Check the modes you plan to use.
- JVC DLA-NZ800
- Caution
- Epson QB1000
- Depends
In practice
Differences you will notice
A thirty-pound mount rating settles the question right away
NZ800 weighs 50.8 lb, which is more than a mount rated for thirty pounds can take. QB1000’s 28.2 lb chassis stays under that headline limit, though the hardware, structural fixing and installation instructions still need checking. The JVC weighs 22.6 lb more, about 80 percent heavier, so don’t reuse the mount without verifying it.
How we worked this out
JVC DLA-NZ800: Projector weight 50.8 lb. Epson QB1000: Projector weight 28.2 lb. Difference 22.6 lb, ratio about 1.80. Example mount rating is hypothetical.
Set up separate JVC presets for movie night and competitive gaming
According to JVC, ALLM switches off Frame Adapt HDR, dynamic laser control and Clear Motion Drive. So a household that uses the same theater for films and fast games should set up distinct modes for each. Don’t expect every cinema feature to stay active during low-latency play.
How we worked this out
JVC DLA-NZ800: JVC documents the features unavailable under ALLM. Epson QB1000: QB1000 supports 4K/120. No matched processing or lag advantage is inferred without evidence.
A stored 3D collection outweighs the 4K label
4K/120 input works on both, but only NZ800 has documented 3D here. If family movie nights include 3D Blu-rays, put the player, glasses and the required JVC emitter into the total budget. Epson’s US guide documents no 3D playback mode, so don’t count on the 4K label to make that collection work.
How we worked this out
JVC DLA-NZ800: 3D supported with optional PK-EM2 emitter and PK-AG3 glasses. Epson QB1000: US QB1000 guide documents supported signals without a 3D playback mode.
Plug in your numbers
Will either projector work in your room?
This checks hard limits only. Personal preferences are left out of the math.
JVC DLA-NZ800
Check this one yourselfWe do not have a complete verified lens range for this exact model.
Epson QB1000
Does not work with your numbersFor a 120-inch 16:9 picture, the calculated lens range is about 11.77 to 24.75 ft. You entered 9.50 ft.
Measure distance from the lens to the screen. The math assumes a 16:9 picture and uses the verified throw range for each exact model.
Option A
JVC, DLA-NZ800
DLA-NZ800
In JVC’s movie-focused laser range, this large theater projector brings 4K/120 input, 3D support and a broader powered lens.
- Best for
- Native-4K D-ILA and 3D matter for your movie collection
Facts we checked
- Weight: 50.8 lb
- 4K imaging: Native 4096 by 2160 D-ILA panels
- 4K/120: Supported
- 3D: Supported with the required accessories
Option B
Epson, V11HB23120
QB1000
For a dedicated theater, this large 3LCD laser projector provides powered lens controls, 4K/120 support and automatic HDR tone mapping.
- Best for
- A much lighter projector is what the installation calls for
Facts we checked
- Weight: 28.2 lb
- 4K imaging: 4K PRO-UHD 3LCD pixel shifting
- 4K/120: Supported
- 3D: No 3D mode documented in the US guide
Spec by spec
Where they really differ
| Spec | JVC DLA-NZ800 | Epson QB1000 | In practice |
|---|---|---|---|
| Weight | 50.8 lb | 28.2 lb | Check the ceiling structure and the mount before upgrading. |
| 4K imaging | Native 4096 by 2160 D-ILA panels | 4K PRO-UHD 3LCD pixel shifting | Both show color simultaneously. How many native panels each has doesn’t amount to a measured picture-quality verdict. |
| 4K/120 | Supported | Supported | Input format by itself can’t be used to compare end-to-end gaming lag. |
| 3D | Supported with the required accessories | No 3D mode documented in the US guide | Playing a 3D disc collection requires explicit support. |
| Published light output | 2,700 published lumens | 3,300 ISO white lumens and 3,300 IDMS color lumens | Because the ratings are described differently, they can’t show a measured brightness gap. |
Trade-offs
What each pick costs you
With JVC DLA-NZ800
- Turning on Auto Low Latency switches off Frame Adapt HDR, laser dynamic control and Clear Motion Drive.
With Epson QB1000
- A 120-inch picture can't be made from a ten-foot lens position, because the minimum throw is 1.35:1.
Change of plan
When the answer changes
Native-4K D-ILA and 3D matter for your movie collection
Go with JVC DLA-NZ800. Your mount and the structure holding it are rated for its 50.8 lb chassis
A much lighter projector is what the installation calls for
Go with Epson QB1000. Simultaneous-color 3LCD with powered optics is what you are after
By the numbers
What the data shows
What we found across the home projectors we compare, plus the checked facts behind each finding.
Show the facts and the math
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| JVC DLA-NZ800 |
|
|
|
| Epson QB1000 |
|
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
JVC DLA-NZ800
Native-4K D-ILA and 3D matter for your movie collection
See price & reviews on AmazonEpson QB1000
A much lighter projector is what the installation calls for
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money