The catch
TP-Link Deco XE75 Pro 3-Pack
Its only multi-gigabit socket is used up by a multi-gigabit WAN.
Side by side
TP-Link Deco XE75 Pro vs Deco BE67: XE75 Pro has a fast internet port, but its downstream sockets are only gigabit
Quick verdict
A multi-gigabit internet connection alongside a faster-than-Gigabit wired room is a job for Deco BE67. XE75 Pro offers only one 2.5GbE port per node, and using that port for internet leaves Gigabit downstream connections. Pick XE75 Pro if those wired limits fit your equipment and a 6GHz-capable Deco mesh is the main goal. Either way, you still need a deliberate port plan.
Before you buy
Why, and what it costs you
Give fast internet and a fast office their own sockets
On a 2Gbps internet plan, the modem or ONT normally occupies XE75 Pro's only 2.5GbE socket. A wired office on either remaining port ends up crossing a Gigabit link.
Where this comes from
After its 2.5GbE WAN connection, XE75 Pro leaves 1GbE plus 1GbE. After its 10GbE WAN connection, BE67 leaves 2.5GbE plus 1GbE.
The catch
TP-Link Deco BE67 3-pack
Each node has just one 10GbE port.
TP-Link Deco XE75 Pro 3-Pack
- Why pick it
- A 6GHz Deco network is the goal, with Gigabit wired rooms
- Your internet is Gigabit, so the 2.5GbE socket can go to a local device
- The catch
- Its only multi-gigabit socket is used up by a multi-gigabit WAN.
TP-Link Deco BE67 3-pack
- Why pick it
- Multi-gigabit internet and a 2.5GbE wired room both have to work
- A 10GbE-capable port has to stay free for a chosen high-speed link
- The catch
- Each node has just one 10GbE port.
We may earn a commission from qualifying Amazon purchases. How we make money
What this page compares
Deco XE75 Pro and BE67 three-packs diverge on fast internet, wired backhaul and how to keep a NAS connected without wasting the fastest port.
A multi-gigabit internet connection alongside a faster-than-Gigabit wired room is a job for Deco BE67. XE75 Pro offers only one 2.5GbE port per node, and using that port for internet leaves Gigabit downstream connections. Pick XE75 Pro if those wired limits fit your equipment and a 6GHz-capable Deco mesh is the main goal. Either way, you still need a deliberate port plan.
Which one fits
Pick the situations that sound like you
Run 2Gbps internet along with a 2.5GbE wired office
After XE75 Pro uses its only multi-gigabit socket for WAN, it has no multi-gigabit LAN socket left.
- TP-Link Deco XE75 Pro 3-Pack
- Caution
- TP-Link Deco BE67 3-pack
- Better fit
Pair Gigabit internet with one fast local NAS
A faster socket can be set aside on both for that local link.
- TP-Link Deco XE75 Pro 3-Pack
- Good
- TP-Link Deco BE67 3-pack
- Good
Put two satellite branches and a gateway NAS on direct connections
Four sockets are needed for WAN plus three downstream cables.
- TP-Link Deco XE75 Pro 3-Pack
- Not suitable
- TP-Link Deco BE67 3-pack
- Not suitable
Stay with a 6GHz Deco network
6GHz and the Deco family are both supported.
- TP-Link Deco XE75 Pro 3-Pack
- Good
- TP-Link Deco BE67 3-pack
- Good
In practice
Differences you will notice
Give fast internet and a fast office their own sockets
On a 2Gbps internet plan, the modem or ONT normally occupies XE75 Pro's only 2.5GbE socket. A wired office on either remaining port ends up crossing a Gigabit link.
How we worked this out
After its 2.5GbE WAN connection, XE75 Pro leaves 1GbE plus 1GbE. After its 10GbE WAN connection, BE67 leaves 2.5GbE plus 1GbE.
Work out where the NAS needs the fast connection
When internet is only Gigabit, XE75 Pro can put a Gigabit socket on WAN and set aside 2.5GbE for one directly attached NAS or client. That may be enough for a modest office plan, with no need to buy BE67 for a WAN upgrade you won't use.
How we worked this out
With auto-sensing WAN/LAN roles, internet can be assigned to a supported socket. A direct NAS link doesn't mean every remote client can exceed Gigabit.
A three-node kit does not leave three gateway sockets free
Internet plus two satellite branches in a wired star takes up all three sockets on either model. A gateway NAS on top of that needs an appropriate switch or a different topology.
How we worked this out
Three gateway connections, matching the physical socket count, come from one WAN plus two wired satellite branches.
Plug in your setup
Can this mesh kit handle your wired layout?
Wiring your mesh nodes together with Ethernet? Count the ports before you buy. This checks direct cables from the main unit to each satellite, with no extra network switch. These answers are placeholders until you apply your own.
TP-Link Deco XE75 Pro 3-Pack
Passes these checksThe ports cover this 2-node wired layout with 0 gateway LAN ports to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
TP-Link Deco BE67 3-pack
Passes these checksThe ports cover this 2-node wired layout with 0 gateway LAN ports to spare. Your internet-to-device path tops out at a 1 Gb/s link ceiling before overhead, which is not a promised download speed.
Port speeds are physical link ratings. They do not measure Wi-Fi throughput. Cable quality, client adapters and network settings still matter. Every node you plan on must come in the linked bundle. This assumes router mode with one internet port and star wiring. PoE units also need a compatible power source, which this port check does not size. A switch, access-point mode or a different layout changes the result. It does not predict wireless coverage.
Option A
TP-Link, Deco XE75 Pro
Deco XE75 Pro 3-Pack
A three-node Deco setup gets a faster internet socket and 6 GHz here. The second Ethernet link is still capped at a gigabit.
- Best for
- A 6GHz Deco network is the goal, with Gigabit wired rooms
Facts we checked
- Per-node ports: One 2.5GbE and two Gigabit
- Left once the fastest port carries internet: Two Gigabit ports
- Wireless standard: Tri-band Wi-Fi 6E
- Top single Ethernet link: 2.5Gbps
Option B
TP-Link, Deco BE67
Deco BE67 3-pack
This tri-band BE14000 mesh pairs 10Gbps networking with a fast set of 6 GHz radios.
- Best for
- Multi-gigabit internet and a 2.5GbE wired room both have to work
Facts we checked
- Per-node ports: One 10GbE, one 2.5GbE and one Gigabit
- Left once the fastest port carries internet: One 2.5GbE and one Gigabit
- Wireless standard: Tri-band Wi-Fi 7
- Top single Ethernet link: 10Gbps
Spec by spec
Where they really differ
| Spec | TP-Link Deco XE75 Pro 3-Pack | TP-Link Deco BE67 3-pack | In practice |
|---|---|---|---|
| Ports per node | One 2.5GbE and two Gigabit | One 10GbE, one 2.5GbE and one Gigabit | Either has three sockets, though the speeds are spread across them differently. |
| After the fastest port takes internet | Two Gigabit ports remain | One 2.5GbE and one Gigabit remain | A multi-gigabit downstream socket is preserved on BE67. |
| Wireless generation | Tri-band Wi-Fi 6E | Tri-band Wi-Fi 7 | 6GHz is on both, and BE67 adds Wi-Fi 7 features for compatible clients. |
| Highest individual Ethernet link | 2.5Gbps | 10Gbps | The cable and the other end have to negotiate the same rate. |
Trade-offs
What each pick costs you
With TP-Link Deco XE75 Pro 3-Pack
- A Gigabit link may still lie in the path of remote wired clients.
With TP-Link Deco BE67 3-pack
- An extra switch is still needed for a three-branch gateway layout.
Change of plan
When the answer changes
Both my internet and my wired office need more than Gigabit
Go with TP-Link Deco BE67 3-pack. For those two links, BE67 has separate sockets faster than Gigabit.
I only need one fast local connection, and my wired rooms are Gigabit
Go with TP-Link Deco XE75 Pro 3-Pack. The single 2.5GbE port on XE75 Pro can be set aside for that connection.
Decision guide
How to decide
A multi-gigabit internet connection that has to coexist with a faster-than-Gigabit wired room points to Deco BE67.
Give fast internet and a fast office their own sockets
On a 2Gbps internet plan, the modem or ONT normally takes XE75 Pro's only 2.5GbE socket. A wired office on either remaining port then sits behind a Gigabit link. BE67 can put internet on 10GbE and the office uplink on 2.5GbE, which is why BE67 is the choice for that two-fast-link plan. A 10GbE internet socket does not make the separate 2.5GbE office link run at 10Gbps.
Work out where the NAS needs the fast connection
With only Gigabit internet, XE75 Pro can give a Gigabit socket to WAN and keep 2.5GbE for one directly attached NAS or client. That may cover a modest office plan, with no need to buy BE67 for a WAN upgrade you would not use. BE67 is more flexible when several links need different high speeds, yet neither three-port node offers unlimited local connections. Sketch every endpoint and uplink before deciding where the faster socket goes.
A three-node kit does not leave three gateway sockets free
Internet plus two satellite branches in a wired star takes up all three sockets on either model. A gateway NAS on top of that needs an appropriate switch or a different topology.
What this page can’t tell you
- Port rates are not used to infer any throughput or latency result. Wi-Fi 7 features need compatible clients.
By the numbers
What the data shows
What we found across the mesh Wi-Fi systems we compare, plus the checked facts behind each finding.
Show the facts and the math
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| TP-Link Deco XE75 Pro 3-Pack |
|
| |
| TP-Link Deco BE67 3-pack |
|
|
Ready to buy
See today’s price and what owners say
Open either model on Amazon for the current price, customer reviews and delivery options.
TP-Link Deco XE75 Pro 3-Pack
A 6GHz Deco network is the goal, with Gigabit wired rooms
See price & reviews on AmazonTP-Link Deco BE67 3-pack
Multi-gigabit internet and a 2.5GbE wired room both have to work
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money