The catch
Anker SOLIX C1000
Compared with the C1000 Gen 2 it weighs more and has a lower continuous AC rating. The two generations also don’t share the same expansion path.
Side by side
A shorter transfer specification points to the DELTA 3. The C1000 offers a little more capacity and solar intake, and expansion works with both.
Before you buy
Modeled at a steady 300W load, Anker SOLIX C1000 comes to about 2.8 hours and EcoFlow DELTA 3 to 2.7 hours.
Where this comes from
Hours = nominal Wh × 0.8 / 300W, using inputs of 1056Wh and 1024Wh. The 80% factor allows for unusable energy and conversion losses and is shared for planning. It is not a measured efficiency. Idle draw, temperature and the real load will change runtime.
The catch
Compared with the C1000 Gen 2 it weighs more and has a lower continuous AC rating. The two generations also don’t share the same expansion path.
The catch
A single 500W solar input can’t take advantage of the 1000W two-input setup on the Plus model.


We may earn a commission from qualifying Amazon purchases. How we make money
The DELTA 3 is the choice for the shorter transfer specification. The C1000 has a little more capacity and solar intake, and each supports expansion.
The energy gap is minor
Which one fits
DELTA 3 accepts 500W, while C1000 accepts up to 600W of compatible solar input. Voltage and current limits have to be satisfied by the panels as well.
C1000 has a 20ms transfer limit, while DELTA 3 publishes 10ms. Test the connected equipment, since a transfer specification alone can’t guarantee uninterrupted operation.
In the shared planning case, Anker SOLIX C1000 reaches 2.8 hours and EcoFlow DELTA 3 reaches 2.7. Measure the actual wattage before choosing a required overnight reserve.
Anker SOLIX C1000 allows 600W of maximum input and EcoFlow DELTA 3 allows 500W. Compare your actual panel strings with the voltage and current limits as well as this total.
In practice
Modeled at a steady 300W load, Anker SOLIX C1000 comes to about 2.8 hours and EcoFlow DELTA 3 to 2.7 hours.
Hours = nominal Wh × 0.8 / 300W, using inputs of 1056Wh and 1024Wh. The 80% factor allows for unusable energy and conversion losses and is shared for planning. It is not a measured efficiency. Idle draw, temperature and the real load will change runtime.
EcoFlow DELTA 3 stores 37.1 nominal watt-hours per pound, and Anker SOLIX C1000 stores about 37.1.
Nominal energy over published weight gives 1056 / 28.44 and 1024 / 27.6. It is a comparison of stored energy per lifting weight and not of measured efficiency or handle comfort.
Compared with DELTA 3, C1000 accepts 20% more maximum solar input yet stores only about 3% more nominal energy.
Solar: (600 / 500 - 1) × 100 = 20%. Energy: (1056 / 1024 - 1) × 100 = 3.1%.

Anker SOLIX, A1761
The original C1000 combines 1,056Wh with an 1,800W inverter and can take a matching expansion battery. It still makes sense when adding capacity is a higher priority than saving weight.

EcoFlow, DELTA 3
This expandable DELTA 3 is for buyers who can do without the extra solar input of the Plus model. Battery and inverter are the same size, so the simpler charging setup may be all you need.
Spec by spec
| Spec | Anker SOLIX C1000 | EcoFlow DELTA 3 | In practice |
|---|---|---|---|
| Nominal battery energy | 1056 Wh | 1024 Wh | The starting runtime budget comes from stored energy. |
| Continuous AC output | 1800 W | 1800 W | Load screening uses this sustained rating, which is separate from surge and boost modes. |
| Lifting weight | 28.44 lb | 27.6 lb | Flat ground is where wheels help. A trunk, step or shelf still takes a lift. |
| Maximum solar input | 600 W | 500 W | Panel voltage, current and per-port limits have to fit as well. |
| Dedicated battery expansion | Supported with compatible equipment | Supported with compatible equipment | Integrated battery expansion is not the same as charging from an external source. |
| Published transfer limit | 20 ms | 10 ms | Check the exact device being connected. Even a short transfer specification can’t guarantee that every load runs without interruption. |
Trade-offs
Decision guide
Pick the DELTA 3 for the shorter transfer specification. Pick the C1000 for a little more capacity and solar intake, since both support expansion.
The C1000 has 32Wh more, worth roughly five modeled minutes at 300W. Capacity is close here, and this is not a full runtime upgrade.
Each expands only within its own compatible system. If you already own a supported battery, compare the complete system cost before replacing the main unit.
The DELTA 3 lists 10ms and the C1000 lists 20ms. Before you rely on either for work that can’t tolerate a restart, test the exact computer or network setup.
By the numbers
What we found across the portable power stations we compare, plus the checked facts behind each finding.
Only 6 of the 50 models checked meet every need here: “I need power at campsites and on weekends away”, “I want backup power for the essentials at home”, and “Solar will be a real part of how I recharge”.
6 models fit, out of 50 checkedHow we countedThe count uses each product's current fit ratings for “I need power at campsites and on weekends away”, “I want backup power for the essentials at home”, and “Solar will be a real part of how I recharge”. A need with no documented match is not counted.
| Product | Needs it meets | Facts we checked | Sources |
|---|---|---|---|
| Anker SOLIX C1000 |
|
|
|
| EcoFlow DELTA 3 |
|
|
|
Ready to buy
Open either model on Amazon for the current price, customer reviews and delivery options.

Take in up to 600W of compatible solar
See price & reviews on Amazon
Put a 10ms transfer limit first
See price & reviews on AmazonEach link opens in a new tab.
We may earn a commission from qualifying Amazon purchases. How we make money